Code:CNTR0750

Table top centrifuge with robust construction and acrylic lid. With step less regulator, Digital RPM meter and 0-60 minutes timer and indicator. Speed 0 to 4200 RPM. It can be fitted with different type of rotor heads as per end-user requirements. Supply 230 volts/50Hz

Code:CNTR0760

Table top centrifuge with robust construction and acrylic lid. With step less regulator, Digital RPM meter and 0-99 minutes digital timer and indicator. Speed 0 to 4200 RPM. It can be fitted with different type of rotor heads as per end-user requirements. Supply 230 volts/50Hz

Code:CNTR0770

Special Features

• Microprocessor controlled, Micro-Centrifuge machine(Mini Centrifuge) speed 1000 to 10000 rpm
• Quiet & reliable
• Small foot print
• Built in power supply
• Digital display of time & RPM
• High quality brushless motor

Technical Specification

• rpm in step of 1000 rpm fitted with 0-15 minute electronic digital timer. Supply completed with 2 standard rotors means
  • 6 micro centrifuge of 1.5ml capacity (T-01)
  • 12 micro centrifuge tubes of 0.5ml capacity (T-02)
• To work on 220 volts 50 Hz AC

Code:CNTR0780

The best model for clinical, pathological, Biochemistry and Pharmacy/ Pharmaceutical Labs and to seprate blood serum.
It is also most suitable for infertility labs where low speed is required..

Special Features

• Brushless AC motor (without carbon). (No need to change the carbons as required in other centrifuges)
• Very stable.
• Low in noise.
• Can run continuously upto 8 hours.
• Fitted with anti vibration pads.
• Maintenance free budget priced.

Technical Specification

• Bench Top Centrifuge Machine. The body is made of CRC sheet, finished in power coating.
• See thru acrylic lid.
• Fitted with digital speedometer, digital timer of range 0-99 minutes and variable speed regulator thru rheostat for long life.
• Maximum speed 3000 r.p.m. (without load) and 2850 rpm on load.
• Supply is completed with 8x15ml swing out head, dust cover, instruction manual, 2 spare fuses, cord & plug to work on 220 volts 50 HZ A.C.
• Also supplied with 8 reduction adopter to accept test tubes of size 12x100mm of borosil 5ml capacity. Angle head of 8x15ml can also be supplied in place of swing out head.

Code:CNTR0790

General Purpose Laboratory Centrifuge Machine, Microprocessor based (LCD Display. Heavy duty C.R.C construction finished with powder coating. Bench Top with Digital speedometer.digital timer of range 0-59 minutes and variable speed regulator.Maximum speed 5200 rpm(without load). Fitted with light weight double walled lid made of ABS plastic moulding.Fitted with well balanced universal motor,Digital Speed Indicator, Programmable speed regulator,Lid lock for safe drive

Special Features

• The lid is light in weight to avoid accident due to heavy weight metallic lids during operation.
• Very Stable.
• Low in noise.
• No vibration.
• CE available.
• Fitted with anti vibration pads.
• Dimension of Machine: L=415mm W=360mm H=305mm
• Dimension of outer box: 510x510x390mm
• Weight of machine: 21kg approx.
• Weight with box: 23.5kg

The above machines are without Rotor Head which can be selected by customer as per their specific requirement:

Specification

• 16x15ml Swing Out Head
• 12x15ml Swing Out Head
• 8x15ml Swing Out Head
• 6x50ml Swing Out Head
• 4x50ml Swing Out Head
• 16x15ml Angle Head
• 12x15ml Angle Head
• 8x15ml Angle Head
• 6x50ml Angle Head
• 4x50ml Angle Head
• 4x100ml Angle Head
• 24x15 ml Angle Head

The above mentioned rotor heads are completed with S.S tube carriers, suitable glass/PVC centrifuge tubes, head puller, spanner and rubber cushions.

Code:CNTR0800

• General purpose Laboratory Centrifuge Machine.
• Microprocessor based.
• Heavy duty C.R.C. construction finished with powder coating.
• Fitted with brushless automatic balanced motor.
• Digital timer 0-99 minutes.
• Digital speed indicator.
• Digital R.C.F. indicator.
• Programmable speed regulator.
• Electronic safety lid lock.
• Imbalance detector.

Special Features

• Table top.
• Brushless self balancing motor without carbons.
• High capacity rotors.
• High quality.
• High Performance.

Technical Parameter :

• Max. speed:5000r/min
• Max. RCF:4390xg
• Motor:Brushless Motor
• Noise:≤65dB
• Power:AC 220V 50Hz 15A
• Weight:35 kg.
• Dimensions:530x420x350 (LxWxH)

Code:CNTR0810

High speed Micro Centrifuge Max rpm 16000, Heavy duty plastic injection moulded body, Stainless Steel protection bowl, Fitted with well balance universal motor having long life with inported carbons, Microprocessor based Digital Timer of range 0-15 min. with LCD display, Preset speed controls thru microprocessor from 2000 to 16000rpm, Digital display shows Set Time/Run Time/rpm.

Special Features

• Microprocessor based.
• Fitted with anti vibration pads.
• Motor remain cool even after running full time
• See through acrylic lid.

Supply completed with following accessories :

• Rotor Head to accommodate 12 eppendorf (Centrifuge Tubes with cover) of 1.5ml/2ml (12 x 1.5/2ml) .
• Reduction adopters for 1.5ml eppendorf (MIcro Centrifuge Tubes)
• Head Puller, spanner, dust cover, instruction manual, cord & plug to work on 220 volts 50 Hz A.C.

Optional at extra cost:

• Rotor head to accommodate 24 micro tubes
• Any other size of rotor to accommodate micro-centrifuge can be supplied at customer requirement.

Code:CNTR0820

High speed Micro Centrifuge, Max 20000 rpm, Heavy duty C.R.C. construction, Powder coated finish, Fitted with brushless automatic balanced motor, Digital Timer of range 0-99 minutes, Digital Speed Indicator, Digital R.C.F. Indicator, Programmable Speed regulator, Electronic Safety lid lock, Imbalance detector.

Special Features

• Table Top compact.
• Brushless self Balancing Motor without carbons.
• Ultra High Speed.
• Microprocessor based.
• Low noise.

Code:CNTR0840

Compact table top Haematocrite Centrifuge with see thru acrylic lid, Fitted with variable speed controller, digital speed indicator, digital timer 0-15 minutes. Maximum rpm approx.13000 with load, Digital display shows Set time/ Run time /rpm, Microprocessor based Digital timer of range 0-15 min with LCD display, Preset speed controls thru microprocessor from 2000 to 13000 rpm

Supply completed with following :

• Micro Haematocrite rotor to accommodate 24 capillaries of 75mmx1mm or 12 capillaries.
• Heparinised capillary tubes 75mm long x 1 mm bore(Pack of 100 Nos.)
• Non-Heparinised capillary tubes 75mm long x 1 mm bore(Pack of 100 Nos.)
• Reading device.
• Sealing wax- 1 tray.

Code:CNTR0850

Bench Top high Speed Lab Centrifuge with digital speedometer, digital timer in the range of 0-59 minutes, LED display and speed regulator. Maximum speed 20000 rpm when rotor head of 1.5ml of 12 tubes is fitted. Heavy duty CRC construction furnished with powder coating. Fitted with well balanced universal motor having long life with imported carbons. Supply completed with dust cover, instruction manual, cord & plug to work on 220 volts 50 Hz A.C. This model is supplied without rotor which can be selected from below mentioned options as per customer specific requirement.

Special Features

• See thru acrylic acid.
• Rotor head are manufactured from speed grade aluminium which can withstand high speed.

Code:CNTR0860

Table top refrigerated micro centrifuge machine. The temp. from room temp. upto minus 8°C is controlled by PID electronic digital temp. controller cum indicator. Microprocessor based Digital Timer of range 0-15 min. with LCD display. Preset speed controls thru microprocessor from 2000 to 16000 r.p.m . Digital display shows Set Time/Run Time /R.P.M. S.S. Bowl Size: 9" dia

Special Features

• Microprocessor based Table Top centrifuge.
• Table top centrifuge compact and elegant design.
• Fitted with vacuum feet.
• CFC free refrigent.
• Centrifuge bowl made of stainless steel.

Supply

• complete with following angle rotor heads to accommodate polypropylene micro centrifuge tubes (Ependroff Tubes as well).

Specification

• Angle Rotor Head Cap. 12x1.5/2ml
• Adopters to accept 1.5ml Eppendrof micro-centrifuge tubes.

Code:CNTR0870

• Table Top, Excellent Design with Temp. range from room temperature to minus 8°C is controlled by digital temp. controller cum indicator. Maximum Speed 16000 RPM approx. on load of 1.5ml/2ml head.
• Heavy duty CRC construction furnished with powder coating.
• Fitted with well balance universal motor having long life inported carbons.
• MIcroprocessor based Digital Timer of range 0-15 min. with LCD display.
• Preset speed controls thru microprocessor from 2000 to 16000 rpm but speed of machine depends upon size of rotor.
• Digital display shows Set Time/Run Time/RPM
• Supply is completed with instruction maual, cord & plug to work on 220 Volts 50Hz single phase A.C. The prices of mentioned size as per customer requirement.
• Stainless steel Bowl Size: 11 dia(in inches)

Special Features

• Table Top centrifuge compact and elegant design.
• Fitted with vacuum feet.
• CFC free refrigerant.
• Centrifuge bowl made of stainless steel.
• Stable with no vibration.

Technical Parameter:

• Weight: 57 kg.
• Dimensions: L=27, W=21, H=15 approx (in inches)

Code:CNTR0880

• Bench Top Refrigerated Centrifuge Machine.
• Microprocessor based.
• CFC free refrigerant
• Digital temperature controller cum indicator.
• Fitted with brushless automatic balanced motor.
• Digital timer 0-99 minutes.
• Digital speed indicator.
• Digital R.C.F. indicator.
• Programmable speed regulator.
• Electronic safety lid lock.
• Imbalanced detector

Special Features

• Table top compact.
• Brushless self balancing motor without carbons.
• Ultra high speed.
• Variety of rotors for different applications.
• Elegant design.
• S.S bowl.

Technical Parameter:

• Max. speed:20000 rpm
• Max. RCF:27800xg
• Timer:0-99 min.
• Motor:Brushless Motor
• Power:AC 220V 50 Hz 10A
• Temp. Range:from room temperature to Minus 8°C
• Temp. Accuracy:±2°C
• Weight:60 kg.
• Dimensions:L-27 x W-21 x H-15 approx.(in inches)