The complete structure is made of stainless steel (Grade-304 20G) sheet all over. Environmental air is drawn HORIZONTALLY on work stage. Environmental air is drawn by a balanced blower through pre-filters and is thrown to work chamber through high efficiency HEPA filter retaining 99.97% particulate and Biological contaminants. Tabletop is covered with stainless steel. Front door is collapsible type & side panels are fixed and made of clear thick plexi glass sheet. Including U.V. Tube fluorescent tube light, gas cock and manometer.
VERTICAL MODEL is also available where air is drawn VERTICALLY on the work stage.
OPTIONAL: An exhaust system can be provided at the bottom of the unit to throw the air outside the work place.

The Equipment is fabricated out of electro galvanized steel sheet thoroughly epoxy powder-coated. Environmental air is drawn HORIZONTALLY on work stage. Environmental air is drawn by a balanced blower through pre-filters and is thrown to work chamber through high efficiency HEPA filter retaining particulate and biological contaminants larger than 0.3 microns. Tabletop is covered with stainless steel. The side panels & front door is made of thick clear imported plexy glass sheet including U.V. Tube fluorescent tube light, gas cock and manometer.
VERTICAL MODEL is also available where air is drawn VERTICALLY on the work stage.
OPTIONAL: An exhaust system can be provided at the bottom of the unit to throw the air outside the work place.

The Equipment is fabricated out of reinforced Wooden Board (pest and weather resistant) which is clad in white laminates. Air is drawn HORIZONTALLY on work stage. Environmental air is drawn by a balanced blower through pre-filters and is thrown to work chamber through high efficiency HEPA filter retaining particulate and biological contaminants larger than 0.3 microns. Tabletop is covered with stainless steel. The side panels & front door is made of thick clear imported plexy glass sheet including U.V. Tube fluorescent tube light, gas cock and manometer.
VERTICAL MODEL is also available where air is drawn VERTICALLY on the work stage.
OPTIONAL: An exhaust system can be provided at the bottom of the unit to throw the air outside the work place.

Structure made of Stainless steel sheet (all over)

• Efficiency: 99.97% down to 0.03 micron
• Blower Unit: Centri-balances Centrifugal
• Motor: 1/3HP, 1440RPM
• Illumination: 40 W Fluorescent Tube
• Noise Level: Below 65db Discharge Air Volume 90cfm +10%
• Unit complete with following: Centri-balanced Centrifugal Air Succession blower Unit, fluorescent tube light, static Pressure Manometer (Acrylic)
• Pre Filter size- 24 x 24- 03 nos. Non woven synthetic fiber washabletype, frame SS Sheet & alumn. Combined, efficiency 95% of 5 micron.
• HEPA Filter as per size. Type non washable, Rated air flow –750CFM Pressure drop –20mm (WG), Efficiency- 99.97% Down to 0.3 Micron.

Structure made of Stainless steel sheet 20G (all over)

• Efficiency: 99.97% down to 0.03 micron
• Bower Unit: Centri-balances Centrifugal
• Motor: 1/3HP, 1440RPM
• Illumination: 40 W Fluorescent Tube
• Noise Level: Below 65db
• Discharge Air Volume 90cfm +10%
• Unit complete with following: Centri-balanced Centrifugal Air Succession blower Unit, fluorescent tube light, static Pressure Manometer (Acrylic), Level Adjuster, side Transparent Acrylic Or SS Sheet Fixed Panels, Front PVC Curtains with SS Channels, Safety grills for HEPA and Pre-filters, Filtration – 3 stage filter
• Pre Filter – size– 24 x 24– 03 nos. Non woven synthetic fiber washable type, frame SS Sheet & alumn. Combined, efficiency
• HEPA Filter" as per size Type non washable, Rated air flow –750CFM Pressure drop –20mm (WG), Efficiency– 99.97% Down to 0.3 Micron.

Structure is made of Stainless steel sheet 20G (all over)

• Efficiency: 99.97% down to 0.03 micron
• Blower Unit: Centri-balances Centrifugal
• Motor: 1/3HP, 1440RPM
• Illumination: 40 W Fluorescent Tube
• Noise Level: Below 65db
• Discharge Air Volume 90cfm +10%
• Unit complete with following: Centri-balanced Centrifugal Air Succession blower Unit, fluorescent tube light, static Pressure Manometer (Acrylic), Level Adjuster, side Transparent Acrylic or SS Sheet Fixed Panels, Front PVC Curtains with SS Channels, Safety grills for HEPA and Pre-filters, Pre Filter – size– 24 x 24. Non woven synthetic fiber, washable Type, frame SS Sheet & alumn. Combined, efficiency 95% of 5 micron.
• HEPA Filter asper size. Type non washable, Rated air flow –750CFM Pressure drop –20mm(WG) , Efficiency–99.97% Down to 0.3 Micron.

The Equipment is fabricated out of electro-galvanized mild steel sheet stage thoroughly epoxy powder-coated work stage thoroughly lined with Stainless steel with illumination by fluorescent tube lights. The unit is complete with H.E.P.A. filtered clean exhaust duct. Efficiency up to 99.97% retaining particles upto the size of 0.03 micron. To work on 220/230 VAC 50 Hz.

The Equipment is made of Stainless Steel Sheet (20G) all over work stage thoroughly lined with Stainless steel with illumination by fluorescent tube lights. The unit is complete with H.E.P.A. filtered clean exhaust duct. Efficiency up to 99.97% retaining particles upto the size of 0.03 micron. To work on 220/230 VAC 50 Hz.

Ultra Clean Air Work Station, Vertical type, made of wooden board (Pest & Weather resistant) which is clad in laminated sheet work stage thoroughly lined with Stainless steel with illumination by fluorescent tube lights. The unit is complete with H.E.P.A. filtered clean exhaust duct. Efficiency up to 99.97% retaining particles upto the size of 0.03 micron. To work on 220/230 VAC 50 Hz.

Laminar Air Flow Horizontal.Made of thick playboard civered with white sunmica & epoxy painted inside. Fitted with microprocessor control digital display with filter failure alarms.

Structure made of 19 mm Thick Plyboard covered with melamine lamination finish or mild steel duly powder coated or satinless steel. Work bench of perforated stainless steel in all models. Sides of work bench covered with transparent acrylic sheet/melamine. Front acrylic door of collapsible type. Properly balanced blowers fitted on H.P. Electric motor provided on the top portion to supply sufficient air to HEPA filter. HEPA filter provided vertically on back of the work bench to provide clean air to the work bench horizontally. HEPA filter efficiency 99.97%, partical retention >0.3 micron. Pre-filters efficiency 90.0%, partical retention >5.0 micron. One flourscent tube and one U.V. Germicidal tube provided over work bench. Cock for gas on work bench. Static pressure manometer fitted on top.

Laminar Air Flow Horizontal. Made of thick playboard civered with white sunmica & epoxy painted inside. Fitted with switches for blower, fluorescent light & UV light.

Structure made of 19 mm Thick Plyboard covered with melamine lamination finish or mild steel duly powder coated or satinless steel. Work bench of perforated stainless steel in all models. Sides of work bench covered with transparent acrylic sheet/melamine. Front acrylic door of collapsible type. Properly balanced blowers fitted on H.P. Electric motor provided on the top portion to supply sufficient air to HEPA filter. HEPA filter provided vertically on back of the work bench to provide clean air to the work bench horizontally. HEPA filter efficiency 99.97%, partical retention >0.3 micron. Pre-filters efficiency 90.0%, partical retention >5.0 micron. One flourscent tube and one U.V. Germicidal tube provided over work bench. Cock for gas on work bench. Static pressure manometer fitted on top.

Laminar Air Flow Horizontal. Complete S.S construction fitted with microprocessor control digital display and filter failure alarms.

Structure made of 19 mm Thick Plyboard covered with melamine lamination finish or mild steel duly powder coated or satinless steel. Work bench of perforated stainless steel in all models. Sides of work bench covered with transparent acrylic sheet/melamine. Front acrylic door of collapsible type. Properly balanced blowers fitted on H.P. Electric motor provided on the top portion to supply sufficient air to HEPA filter. HEPA filter provided vertically on back of the work bench to provide clean air to the work bench horizontally. HEPA filter efficiency 99.97%, partical retention >0.3 micron. Pre-filters efficiency 90.0%, partical retention >5.0 micron. One flourscent tube and one U.V. Germicidal tube provided over work bench. Cock for gas on work bench. Static pressure manometer fitted on top.

Laminar Air Flow Horizontal. Made of mild steel duly powder coated fitted with microprocessor control digital display and filter failure alarms.

Structure made of 19 mm Thick Plyboard covered with melamine lamination finish or mild steel duly powder coated or satinless steel. Work bench of perforated stainless steel in all models. Sides of work bench covered with transparent acrylic sheet/melamine. Front acrylic door of collapsible type. Properly balanced blowers fitted on H.P. Electric motor provided on the top portion to supply sufficient air to HEPA filter. HEPA filter provided vertically on back of the work bench to provide clean air to the work bench horizontally. HEPA filter efficiency 99.97%, partical retention >0.3 micron. Pre-filters efficiency 90.0%, partical retention >5.0 micron. One flourscent tube and one U.V. Germicidal tube provided over work bench. Cock for gas on work bench. Static pressure manometer fitted on top.

We deal in manufacturing of horizontal laminar air flow that finds it applications in various hospitals, electronic industry and others. We use high grade component and quality raw material that is tested on various quality parameters and ensure smooth functionality.

Specifications:

• Direction of flow: Horizontal
• Cleanliness: CLASS 100
• Velocity: 90 FPM + / -20%
• Hepa Filter: Size and QTY. will depend on the Size selected
• Particle retention: Above 0. 3 micron
• Blower Assembly: 1 / 3 HP, 1440 RPM
• Noise level: 65 decibel + / -5%
• Rate of air flow: 0. 40 to 0. 75 M / Sec. (90 FPM)
• Vibration level: < 2. 5 micron

Structure made of 19 mm Thick Ply board covered with sunmica from outside. Work bench of perforated stainless steel. Sides of work bench covered with transparent acrylic sheet. Front acrylic door of collapsible type. Properly balanced blowers fitted on 1/4 H. P. Electric motor provided on the top portion to supply sufficient air to HEPA filter provided on top of work bench horizontally to supply clean air to the work bench vertically. Pre-filters provided on the top to supply pre filtered air to the blowers. One flour scent tube and one U. V. Germicidal tube provided over work bench. Static pressure manometer fitted on top. Back cover fixed with screws for convenient removal for attending blowers, filters and motor when needed.

Code: SLEP5152

We are actively engaged in providing a qualitative range of Laminar Air Flow Cabinet. This cabinet is widely used for various laboratory and research works including microbiological processing, sterile handling, etc. The offered cabinet is manufactured using the finest grade raw material and advanced technology in accordance with the universal quality norms. Also, the offered cabinet is available in various sizes as per the varied requirements of clients.

Features:

• Easy operation
• Cleanliness
• Low noise level
• Excellent power supply
• Compact construction

Code: SLEP5162

Laminar Air Flow Cabinet are ideal for microbiological manipulation work with bioassays sterility testing & research work. Vial filling and bunching operation in parenteral units and for general dry processing work in semi conductor unit. It provides a comfortable 'Sit Down' working position for the operators. Construction: Basically constructed out of termite and insect resistant board. All exterior surfaces are covered with decorative laminates. The work table is made of laminated / S. S. top. Side more...

Our organization is counted among the prominent firms, offering Laminar Air Flow Cabinet. However if required, tubular stand can be provided for these laminar flow cabinet & for its work table, of these equipment are to used as floor mounting design. Our range is highly recognised by the client in all over the nation for its highly productive range.

Code: SLEP5194

We are a leading manufacturer and exporter of a quality range of Biological Safety Cabinet is designed for product, personnel and environmental protection. They are suitable for general microbiological work with agents assigned to bio safety levels 1,2 or 3. These Biological Safety Cabinets are ideally used in hospitals, clinical research, life science and pharmaceutical laboratories. These units are comes with motorized sliding shattered proof glass view screen, base stand, removable work tray, supply filter and HEPA filters. These Class II biological safety cabinets can be either exhausted back into the room or outside the room.

Special Features:

• Large front panel graphical display and user friendly control panel
• 10° slanted view screen provides highly visible and easily accessible area
• Work area is surrounded by negative pressure , double-wall plenums for superior protection
• Sturdy constriction of cabinet protects from air leakage from the working zone

Applications:

• Exhaust Duct: Through exhaust duct, class II A2 bio safety cabinet is compatible with exhaust system (optional), to exhaust contaminated air outside the cabinet or room
• Front window: Motorised Front window consists of frameless laminated UV resistance shattered proof glass door
• Control and Display: Micro controller controls and indicates information of pressure, system status with audio visual alarm
• UV interlock system: In order to prevent operator exposure to harmful ultraviolet radiation, an UV interlock system is a standard feature with all cabinets with UV lamp operator must close the sash in order for UV to activate and if sash is accidently raised, the UV lamp will automatically deactivate to ensure safety
• Water proof socket: 2 water proof sockets are located in the side panel, for optimum convenience of using small devises inside the cabinet
• Front air flow intake grid: Aerodynamically designed front airflow intake grid eliminates potential turbulence and contamination
• Extensible Valve: 2 supply valves are available for extensive function, compatible with liquid, gas and vacuum
• Fabrication: The outer of the equipment is fabricated out of Mild steel duly epoxy powder coated and the inner chamber is totally made of joint less stainless steel 304 grade

Optional Accessories:

• Loop Sterilizer: The loop sterilizer has an asbestos-free core element that uses infrared heating to produce 815°C (1500°F). It completely sterilizes microorganisms in 5-7 seconds. The loop sterilizer uses well-proven technology to provide instant sterilization of platinum inoculating loops, needles, glass tube/pipette mouths and various metal & borosilicate glass instruments.
• Virus burn out unit: Fabricated by using IS 304 stainless steel, equipped with high resistance electric heater with asbestos / glass wool insulation, automatic temperature controlling thermostat to raise the exhaust air temperature to 80-degree Celsius (Adjustable), to destroy hazardous organisms which are contaminated in the exhaust air to protect the environment.
• Hours meter: For UV light.