Physics Experiments Kits, Exporters & Suppliers - School Educational Equipments Manufacturers & Exporters of Educational Equipments for Lab. Science Lab Products, Teaching Aids, Classroom Instruments, Educational Laboratory

- To show the change in intensity of bulb with adding cells.
- To interrupt the electricity by using push switch.
- The series and parallel combination of bulbs.
- To demonstrate the effect of variable resistance.
- The working of change over switch.
- To demonstrate the difference between diode and resistance. and many more......

- Vertical demonstration for whole class.
- 4 Name of component & symbol printed on modules.
- 4 Each component fitted with magnet on four grooves provided on rear side of panel.

Item Name | Qty. |
---|---|

Cell holder | 3 |

Bulb with holder | 3 |

Lead 4mm red 10cm | 3 |

Lead 4mm black 10cm | 3 |

Lead 4mm red 25cm | 1 |

Lead 4mm black 25cm | 1 |

Push switch | 1 |

Steel wool | 1 |

Universal clips | 1 |

Rheostat | 1 |

Insulated wire | 1 |

Electrode holder with 2 carbon rods | 1 |

Soft iron bar | 1 |

Compass | 1 |

Change over switch | 1 |

Resistance | 1 |

Diode | 1 |

Crocodile clips | 2 |

Magnetic Board | 1 |

Instruction manual | 1 |

- To show the change in intensity of bulb with adding cells.
- To interrupt the electricity by using push switch.
- The series and parallel combination of bulbs.
- To demonstrate the effect of variable resistance.
- The working of change over switch.
- To demonstrate the difference between diode and resistance. and many more......

It is an introduction to the basic principles of electricity through experiments. This kit is specially framed for the students to learn the basic electricity phenomenon.

Item Name | Qty. |
---|---|

Wall thermometer Alcohol filled | 1 |

Iron nail big | 1 |

Terminal clips made of Brass | 2 |

Copper ring | 1 |

Rubber rod | 1 |

Wooden block disc shape | 1 |

Brass screw | 1 |

Aluminium rivet | 1 |

Marble block small | 1 |

Piece of Porcelain block | 1 |

Carbon block | 1 |

Nail 50mm long | 1 |

Piece of cord | 1 |

Spool of copper wire PVC insulated | 1 |

Bare copper wire | 1 |

Nichrome wire grey cotton insulated | 1 |

Bulbs 3.8 Volts screw type | 10 |

Battery square 4.5 Volt cell holder | 1 |

Bulb holders plastic | 5 |

- Capacitance of series & parallel combination of plate capacitors.
- Effect of area of plates on capacitance.
- Effect of distance between the plates on capacitance.
- Effect of different dielectric material on capacitance.

- Constant area of plates show capacitance C with variation of distance d ( C ∝ 1/d).
- The d can be increased with spacers in steps on 1mm.
- U shaped small bench with marking in cm eitherside.
- 3 different dielectric sheet.
- Large size plates, suitable for demonstration to a group of students.

Item Name | Qty. |
---|---|

Parallel plates (20x20) cm2 pair | 2 |

Parallel plates (28x28) cm2 pair | 1 |

Glass sheet (21x21) cm2 | 1 |

Polystyrene sheet (21x21) cm2 | 1 |

LCR meter (M890G) | 1 |

4mm plug lead pair | 2 |

Spacing blocks (1,2,3,4,6 mm) | 1 |

Capacitor rail | 2 |

Instruction manual |

- To measure the force of attraction between charged capacitor plates by Null Method.
- To calculate the permittivity of Air.
- To measure the force between current carrying conductor and determine the permeability of Air.

By means of null method this balance measures tiny forces, it possess adjustable counterweight and an optical lever. To measure the repulsive force between parallel current-carrying conductors a pair of straight aluminium rods are given. Attractive force between charged capacitor plates ,a pair of plates are also included. In the electromagnetic experiment sufficient deflection may be caused by means of a current of 10-20A. For returning the balance to its original position, fractional weights are added to a small pan which is attached to the upper conductor rod, thus force between the conductors are measured. The dynamic definition of the Ampere or to determine the permeability of Air may be confirmed by interpretation of the result. Permittivity of the air may be observed by the analogous electrostatic experiment. An indirect estimate of the speed of light may be made from these two values. The whole experiment requires a diode laser & scale for the optical lever, fractional weight set for the current experiment, multimetyer for volts and amps, a 300V variable high voltage source and an AC or Dc current source for 10-20A. A detailed manual is included.

Item Name | Qty. |
---|---|

Coulomb and current balance | 1 |

Power supply 0-30V DC, 0-20A | 1 |

Fractional weight set | 1 |

Multimeter | 1 |

Diode laser | 1 |

Wooden scale 50cm | 1 |

Instruction manual | 1 |

- Exp-1 To Study Ohm's Law.
- Exp-2 To Study Kirchoff's Law.
- Exp-3 To Study Series & Parallel Effect of Resistance.
- Exp-4 To Study Resistance as a Voltage Divider.
- Exp-5 To Study LDR Characteristics.
- Exp-6 To Study Thermistor Characteristics.
- Exp-7 To Study PN Junction Diode Characteristics.
- Exp-8 To Study LED Characteristics.
- Exp-9 To Study Zener Characteristics.
- Exp-10To Study Transistor Input/Output Characteristics.
- Exp-11 To Study the RC circuit.
- Exp-12 To Study the charging and discharging of a capacitor.

Code No. PHKIT0209-1 : For Exp-1 to Exp-12. Code No. PHKIT0209-2 : For Exp-1 to Exp-10. Code No. PHKIT0209-3 : For Exp-1 to Exp-9.

Item Name | PHKIT0209-1 | PHKIT0209-2 | PHKIT0209-3 |
---|---|---|---|

Circuit Board | 1 | 1 | 1 |

Digital Multimeter | 3 | 3 | 3 |

Flexible Lead Set (25cm) | 2 | 2 | 2 |

Flexible Lead Set (50cm) | 6 | 6 | 6 |

Flexible lead Set (100cm) | 2 | 2 | 2 |

Resistor Module 330Ω | 1 | 1 | 1 |

Resistor Module 1kΩ | 1 | 1 | 1 |

Resistor Module 3.3kΩ | 1 | 1 | 1 |

Resistor Module 10kΩ | 1 | 1 | 1 |

Resistor Module 100kΩ | 1 | 1 | 1 |

Resistor Module 1kΩ, 1W | 1 | 1 | 1 |

Capacitor Module 0.1µF | 1 | ||

Capacitor Module 0.01µF | 1 | ||

Transistor Module | 1 | 1 | |

LAMP Source | 1 | 1 | 1 |

Thermistor Module | 1 | 1 | 1 |

LED Module | 1 | 1 | 1 |

Zener Module | 1 | 1 | 1 |

Variable Power Supply | 2 | 2 | 1 |

Signal Generator | 1 | ||

Instruction manual | 1 | 1 | 1 |

*Note: CRO required for Exp-11 & Exp-12 is not in the scope of supply. |

- Exp-1 To demonstrate the sound waves and beats.
- Exp-2 To find out the frequency of any unknown tunning fork.
- Exp-3 To find out the speed of sound.
- Exp-4 To demonstrate the Mathematics of Music.

Sound waves consist of a series of air pressure variations. A microphone diaphragm records these variations by moving in response to the pressure changes.

Item Name | Qty. |
---|---|

Microphone sensor | 1 |

Link | 1 |

Tunning forks with stand | 1 |

Hammer | 1 |

Acrylic tube | 1 |

Measuring tape | 1 |

Electronic keyboard | 1 |

*Note: Computer will not be provided with PHKIT0261 kit. |

- Exp -1 Graph Matching.
- Exp -2 Back & Forth Motion.
- Exp -3 Cart on a ramp.
- Exp -4 Determining g on an incline.
- Exp -5 Picket Fence Free fall.
- Exp -6 Ball Toss.
- Exp -7 Bunjee Jump Accelerations.
- Exp -8 Projectile Motion.
- Exp -9 Newton's Second Law.
- Exp -10 Static & Kinetic Friction.
- Exp -11 Air Resistance.
- Exp -12 Pendulum Periods.
- Exp -13 Simple Harmonic Motion.
- Exp -14 Energy of A Tossed Ball.
- Exp -15 Momentum, Energy & Collisions.
- Exp -16 Impulse & Momentum.
- Exp -17 Centripetal Accelerations on A Turn table.
- Exp -18 Acceleration In Real World.
- Exp -19 Polarization of Lights.
- Exp -20 Light, Brightness & Distance.
- Exp -21 Newton's Law of Cooling.

In this Kit we can directly find out the results on the computer by using Vernier Logger Pro 3 software and Vernier Labquest interface with appropriate sensor. It gives an opportunity to students to deal with the advanced technology. Use Labquest as a stand-alone device or as a computer interface

Item Name | PHKIT0313-1 | PHKIT0313-2 | PHKIT0313-3 |
---|---|---|---|

Circuit Board | 1 | 1 | 1 |

Digital Multimeter | 3 | 3 | 3 |

Flexible Lead Set (25cm) | 2 | 2 | 2 |

Flexible Lead Set (50cm) | 6 | 6 | 6 |

Flexible lead Set (100cm) | 2 | 2 | 2 |

Resistor Module 330Ω | 1 | 1 | 1 |

Resistor Module 1kΩ | 1 | 1 | 1 |

Resistor Module 3.3kΩ | 1 | 1 | 1 |

Resistor Module 4.7kΩ | 1 | 1 | 1 |

Resistor Module 10kΩ | 1 | 1 | 1 |

Resistor Module 100kΩ | 1 | 1 | 1 |

Resistor Module 1kΩ, 1W | 1 | 1 | 1 |

Capacitor Module 0.1µF | 1 | ||

Capacitor Module 0.01µF | 1 | ||

Transistor Module | 1 | 1 | |

LAMP Source | 1 | 1 | 1 |

Thermistor Module | 1 | 1 | 1 |

LED Module | 1 | 1 | 1 |

Zener Module | 1 | 1 | 1 |

Variable Power Supply | 2 | 2 | 1 |

Signal Generator | 1 | ||

Instruction manual | 1 | 1 | 1 |

*Note: Computer is not supplied with this setup. |

- Exp-1 Using a simple pendulum, plot L-T and L-T2 graphs. Hence find the effective length of second's pendulum using appropriate graph.
- Exp-2 To study the relationship between force of limiting friction and normal reaction and to find the co- efficient of friction between a block and a horizontal surface.
- Exp-3 To find the downward force, along an inclined plane, acting on a roller due to gravitational pull of the earth and study its relationship with the angle of inclination φ by plotting graph between force and sin(φ).
- Exp-4 To study the variation in volume with pressure for a sample of air at constant temperature by plotting graphs between P and V, and between P and I/V.
- Exp-5 To find the speed of sound in air at room temperature using a resonance tube by two resonance Positions.
- Exp-6 To determine resistance per cm of a given wire by plotting a graph of potential difference versus current.
- Exp-7 To draw the I-V characteristic curve of a p-n junction in forward bias and reverse bias.
- Exp-8 To draw the characteristic curve of a zener diode and to determine its reverse breaks down voltage.
- Exp-9 Characteristics of PN diode.
- Exp-10 To study the Simple Harmonic Motion.
- Exp-11 Charging and Discharging of the capacitor.
- Exp-12 To study the characteristics of a common - emitter NPN or PNP transistor and to find out the values of current and voltage gains.
- Exp-13 To verify laws of reflection of sound.
- Exp-14 To study the dependence of potential difference (V) across a resistor on the current (I) passing through it and determine its resistance. Also plot a graph between V and I.
- Exp-15 To determine the equivalent resistance of two resistors when connected in series.
- Exp-16 To determine the equivalent resistance of two resistors when connected in parallel.

- Exp-1 To demonstrate inter-conversion of potential and kinetic energy.
- Exp-2 To demonstrate conservation of linear momentum.
- Exp-3 To demonstrate the phenomenon of beats, due to superposition, of waves produced by two sources of sound of slightly different frequencies.
- Exp-4 To demonstrate the production of induced emf in a coil due to the movement of (i) a magnet towards and away from it.(ii) a similar coil carrying current towards and away from it.
- Exp-5 To demonstrate the effect of intensity of light.
- Exp-6 Determining g on an Incline.
- Exp-7 The Magnetic Field in a Coil.
- Exp-8 Newton's Second Law and Third Law.
- Exp-9 Energy in Simple Harmonic Motion.
- Exp-10 Newton's Law of Cooling.

Item Name | Qty. |
---|---|

Einstein tablet+ | 1 |

Accelerometer | 1 |

Force Sensor | 1 |

Photo-gates | 2 |

Current Probe sensor | 2 |

Voltage Probe sensor | 1 |

Magnetic Field Sensor | 1 |

Temperature Probe | 1 |

Light Sensor | 1 |

Gas Pressure sensor | 1 |

Friction block & Roller | 1 |

Weight (50 x 10gm) | 1 |

Metal Track | 1 |

Inclined plane | 1 |

Base & Rod | 2 |

Boss head | 2 |

Calorimeter | 1 |

Dynamic trolley | 2 |

Pendulum ball | 1 |

Motion detector | 1 |

Pendulum support | 1 |

Spring | 1 |

Weight (50 x 10gm) | 1 |

Acrylic tube | 1 |

Tube holder | 1 |

Plug in board | 1 |

Resistance board | 1 |

Connecting lead | 10 |

Transistor | 2 |

Zener diode | 1 |

Diode | 1 |

Led | 1 |

Switch | 1 |

Capacitor module | 1 |

Resistance modules | 3 |

Power supply 0-16V | 2 |

Logger Pro3 | 1 |

*Note: Computer will not be provided with PHKIT0365 kit. |