Educational Equipments Manufacturer, Exporters & Suppliers - School Educational Equipments Manufacturers & Exporters of Educational Equipments for Lab. Science Lab Products, Teaching Aids, Classroom Instruments, Educational Laboratory
Pipette Stand (94 Pipettes-Rotary)
Moulded in Polypropylene, this unique stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipette. The lower rotating disc has four concentric troughs with tapered sides and open bottoms which cradle the pipette tips protectively and permits water drops to runoff. The upper disc has a grid pattern concentric with the bottom disc and keeps the pipettes vertical. Liquids draining off the pipettes are retained on the top of the stationary base by the outer ring. This stand can be easily disassembled & reassembled.
code: P146.0094
Pipette Stand (Horizontal)
This detachable Stand can hold 12 Pipettes, 6 on each side, in a horizontal position. Moulded in Polypropylene, this autoclavable stand has two sides which are attached to each other with three metallic rods coated with Polypropylene. This stand can be easily disassembled for space saving storage.
Description : For 12Pipettes
Code: P142.0012
Pipette Box
Made of polypropylene, this Pipette Box is designed in such a way that it can hold Pipettes of different lengths. The top of the box screws on the bottom and the height can be adjusted by screwing or unscrewing the top.
Code: P147.0001
Pipette Stand (Vertical)
This is a stable, non-corrosive, detachable Stand which can hold 28 pipettes with maximum dia 14mm. The heavy base measures 225mm in diameter and a Polypropylene coated square rod measuring 375mm in length is screwed into the base. The top disc that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipette tips rest and liquids drain down to the base. These discs can be adjusted on the rod according to the length of the pipette. The arrows provided on the discs should be kept parallel to ensure that corresponding holes are being centered.
Code: P144.0028