Educational Equipments Manufacturer, Exporters & Suppliers - School Educational Equipments Manufacturers & Exporters of Educational Equipments for Lab. Science Lab Products, Teaching Aids, Classroom Instruments, Educational Laboratory
Thin Layer Chromatography Apparatus, Brass
To Introduce the principles of absorption chromatography using the thin layer technique.This mechanism is having moveable applicator with inbuilt thickness arrangement between 0 to 2 mm (Minimum Div. 0.25 mm). It further consists of the following components. a) Spreader (Applicator) made of electroplated BRASS. b) Perspex base of 114 x 23 cm. to support glass plates. c) Plate rack aluminium, anodised, for ten 20 x 20 cm. or 20 x 10 cm. plates. d) Developing tank with lid. e) Spotting template made of perspex. f) T.L.C. Plates set of five 20 x 20 cm. and two 20 x 5 cm. or set of ten 20 x 10 cm. and two 20 x 5 cm. g) Glass sprayer with rubber bellow, Cap. 100 ml. h) Micro-pipette. i) Scriber for marking lines made of stainless steel. j) Instruction Manual.
Catalog No. |
Particulars |
NML20650 |
Thin Layer Chromatography Apparatus, BrassThin Layer Chromatography Apparatus, Brass |
Thin Layer Chromatography Apparatus, Aluminium
To Introduce the principles of absorption chromatography using the thin layer technique.This mechanism is having moveable applicator with inbuilt thickness arrangement between 0 to 2 mm (Minimum Div. 0.25 mm). It further consists of the following components. a) Spreader (Applicator) made of ALUMINIUM. b) Perspex base of 114 x 23 cm. to support glass plates. c) Plate rack aluminium, anodised, for ten 20 x 20 cm. or 20 x 10 cm. plates. d) Developing tank with lid. e) Spotting template made of perspex. f) T.L.C. Plates set of five 20 x 20 cm. and two 20 x 5 cm. or set of ten 20 x 10 cm. and two 20 x 5 cm. g) Glass sprayer with rubber bellow, Cap. 100 ml. h) Micro-pipette. i) Scriber for marking lines made of stainless steel. j) Instruction Manual.
Catalog No. |
Particulars |
NML20660 |
Thin Layer Chromatography Apparatus, Aluminium |
Accessories For Thin Layer Chromatography Apparatus
Accessories for Thin Layer Chromatography Apparatus
- Accessory 1
Chromatography Cabinet : To introduce the theory and principles of ascending, descending and reverse phase paper chromatography. This is made of wood with glass on all four sides and on top internal surface is wax coated for solvent resistance. Hinged top provided with rubber gasket for air tight closing and window with air tight door. In lower portion heavy castors are provided for easy movement. Finished in natural colour nitrocellulose lacqure. Supplied as standard equipment are two stainless steel troughs and six glass rod. For accommodating 4 filter papers of 45 x 57 cm.
- Accessory 2
Special Drying Cabinet Electrical : With inspection window, takes two drying racks for T.L.C. Plates upto 20 x 20 cm. The drying cabinet is suitable for activating T.L.C. carrier plates for drying of developed T.L.C. Plates as well as for heating T.L.C. Plates sprayed with detecting reagents. The colour reaction can be seen through the inspection window. Temperature range ambient temp to 250°C. S.S. Inner Chamber
- Accessory 3
Dessicator Cabinet : This is used for storing plates of T.L.C. and for general laboratory work. Made of thick sheet, with stout glass door sealed with rubber gasket. A tray for silica gel dessicant and perforated shelf are provided. Inner Dimensions: Size 30 cm. x 50 cm. x 35 cm.
- Accessory 4
T.L.C. Master Sheet : For direct reading of RF values.
- Accessory 5
T.L.C. Plate Storage Cabinet : Made of wood with MICA on all sides. For transport and storage of coated plates, sealed against air humidity. Suitable for 24 plates of size 20 x 20 cm. Size 38 x 23 x 20 cm
- Accessory 6
Draining Rack: For holding washed plates in angular position so that the water can drop of over the corners of wet plates before coating.
- Accessory 7
Spare Brass Applicator
- Accessory 8
Spare Aluminium Applicator
- Accessory 9
Spotting Template: Made of Perspex.
- Accessory 10
Plate Rack, Made of anodized aluminium to take ten plates.
- Accessory 11
Plate Rack, Made of Stainless Steel to take two plates of 20x20 cm. vertically for developing.
- Accessory 12
Glass Plates: All Sides Ground. Size 20X20 Cm.
- Accessory 13
Glass Plates: All Sides Ground. Size 20X10 Cm.
- Accessory 14
Glass Plates: All Sides Ground. Size 20X5 Cm.
- Accessory 15
Chromatography Tank with Cover. Size 20 X 5 Cm.
- Accessory 16
Chromatography Tank with Cover. Size 20 X 10 Cm.
- Accessory 17
Chromatography Tank with Cover. Size 20 X 20 Cm.
- Accessory 18
Glass Sprayer with Rubber Bellow.
- Accessory 19
Perspex Base of 114 X 23 Cm : To Support Glass Plate.
Catalog No. |
Particulars |
NML20670 |
Accessory 1 |
NML20671 |
Accessory 2 |
NML20672 |
Accessory 3 |
NML20673 |
Accessory 4 |
NML20674 |
Accessory 5 |
NML20675 |
Accessory 6 |
NML20676 |
Accessory 7 |
NML20677 |
Accessory 8 |
NML20678 |
Accessory 9 |
NML20679 |
Accessory 10 |
NML20680 |
Accessory 11 |
NML20681 |
Accessory 12 |
NML20682 |
Accessory 13 |
NML20683 |
Accessory 14 |
NML20684 |
Accessory 15 |
NML20685 |
Accessory 16 |
NML20686 |
Accessory 17 |
NML20687 |
Accessory 18 |
NML20688 |
Accessory 19 |
Ultra Voilet Inspection Cabinets
- U.V. Chromatography Inspection Cabinet, One long wave : One long wave for viewing & detecting prepared substance on T.L.C. plates and a number of other laboratory & investigation work. This cabinet is fitted with one long wave U.V. tube & one floresence tube for visible light. An eye protective glass window is also provided on the top front for viewing the samples.
- U.V. Chromatography Inspection Cabinet, Two long wave : Two long wave for viewing & detecting prepared substance on T.L.C.plates & a number of other laboratory & investigation work. This cabinet is fitted with two U.V.tubes of different wave lengths & a florescene tube for visible light. An eye protective glass window is also provide on the top front for viewing the samples.
- Ultra Voilet Fluoresence Viewing Cabinet : This compact mechanism is designed for T.L.C. plates up to 250x300mm. This is also suitable for observing either fluoresence or quenching of fluoresence with either short U.V (254nm) or long U.V. (365nm) of column or paper chromatograms, bacterial or fungal cultures, plant specimen, documents or currency for geniuneness or otherwise, orces & minerals & a number of other laboratory & investigative work.
- Construction : External case is made of thick steel. Often with strong seamless welding & covered with a thick layer of epoxy based polyester paint, which provide a strong, highly scratch & chemical resistant surface. The black inside finish of the cabinet prevents any reflection of the U.V. radiation, which protects eyes. This doal wave mechanism is provided with 1 short wave U.V. tube enveloped with precision optical filter, which emits mostly short wave U.V of mercury line 254 nm with high efficiency & a low pressure mercury discharge tube with black woods glass envelop & a special phosphor coating inside the envelop to produce pre-dominantly long U.V. Output 365 nm with high effiency. A floresence tube is provided for visible light. An eye protective glass window is provided on the top front for viewing the samples & inside chamber.
- U.V. Fluoresence Viewing Cabinet (Triple Wave) : This compact mechanism is provided with 3 seperate U.V. source one for short U.V (Enveloped with precision optical filter(254 nm), one for middle U.V. (312 nm) one for long U.V. (365 nm), fluorescence tube is provided for visible light.
- Ultra Voilet Torch : It is a portable device for emitting U.V. light provided with two long waves U.V. source for examing fluorescent stains or spots in gels or on T.L.C. plates. U.V.source are protected under U.V.transparent window.
Ultra Voilet Protective Goggles
Catalog No. |
Particulars |
NML20690 |
U.V. Chromatography Inspection Cabinet, One long wave |
NML20691 |
U.V. Chromatography Inspection Cabinet, Two long wave |
NML20692 |
Ultra Voilet Fluoresence Viewing Cabinet |
NML20693 |
U.V. Fluoresence Viewing Cabinet (Triple Wave) |
NML20694 |
Ultra Voilet Torch |
NML20695 |
Ultra Voilet Protective Goggles |
Submarine Gel Electrophoresis, Student Mechanism
Submarine Electrophoresis in agrose gels is the most efficient way to separate nucleic acids (DNA/RNA) fragments. In this mechanism the entire gel is submerged below the surface of the buffer. This mechanism answers the demands for small. This economy model minimized the cost of buffer. This elementary unit with fixed platinum electrode assembly consists of perforated lid for vapors, gel trays 5x7 cm(2 nos.), 10x7cm., 8 well comb 1.5mm(2 nos.), 3 well comb 3.0mm, comb stand connecting cord & instruction manual.
Catalog No. |
Particulars |
NML20700 |
Submarine Gel Electrophoresis, Student Mechanism |
Accessories For Submarine Gel Electrophoresis, Student Mechanism
Accessories For Submarine Gel Student Mechanism
- Accessory 1
Vari Pack : It is very simple to operate. It is very ideal for student practical classes & routine clinical work. it is designed to give 50, 100, 200 or 250 volts constantly indicated by LED on each point. Its maximum current is upto 100 mA.
- Accessory 2
Gel Casting mechanism with leveling table.
- Accessory 3
Gel trays 5x7cm (2 nos.)
- Accessory 4
Gel trays 10x7 cm.
- Accessory 5
Comb 8 well x 1.5mm
- Accessory 6
Comb 2 well x 3.0 mm
- Accessory 7
Comb stand
- Accessory 8
Developing Chamber for ethidium bromide staining
- Accessory 9
Gel Scoop U.V.T.
Catalog No. |
Particulars |
NML20710 |
Accessory 1 |
NML20711 |
Accessory 2 |
NML20712 |
Accessory 3 |
NML20713 |
Accessory 4 |
NML20714 |
Accessory 5 |
NML20715 |
Accessory 6 |
NML20716 |
Accessory 7 |
NML20717 |
Accessory 8 |
NML20718 |
Accessory 9 |
Bar Gel Polyacrylamide Electrophoresis Apparatus Circular
Gel can be prepared in glass tubes. This mechanism can be used in controlled temperature for the analysis of heat liable protiens, isoenzymes,isoelectricfocusing & other preparative studies. It is a traditional mechanism meant for running 8 gel tubes of 10cm. long. Acrylic pipes are used to make its circular shape cathode & anode electrode assembly is centrally mounted in circular shape, which provides uniform electrical flow. Three ventilators are provided in the lower buffer reservoir for cool air circulation.The elementary unit consists of anode reservoir, Cathode reservoir, Platinum Electrode assembly (Anode & Cathode)(2 Nos.), Glass Tubes 10 cm.(24 Nos.), Silicone Rubber Gromets Fixed & Spare(8+8 Nos.), Rubber Bungs (12 Nos.), Polythene Closers (24 Nos.), gel Casting stand, Syringe with Needle, Power Cord
Catalog No. |
Particulars |
NML20770 |
Bar Gel Polyacrylamide Electrophoresis Apparatus Circular |
Bar Gel Polyacrylamide Electrophoresis Apparatus Rectangular
It is a standard mechanism meant for running 12 gel tubes of 7.5 cm or 14 cm. long. Upper buffer reservoir & lower buffer reservoir is notched from the side to accommodate detachable Cathode & Abode Platinum electrode assembly central compartment helps to create space to accommodate 14 cm. long glass tubes. The elementary unit consist of 3 main detachable compartments, detachable platinum electrode assembly cathode & anode, glass tubes 7.5 cm.(24 Nos.), 14cm.(24 Nos.), silicon rubber grommets(12 Nos.), rubber Bungs(12 Nos.), Polythene Clousers(24 Nos.), Gel casting tube stand, Syringe 5 Ml. with needle, Power cord.
Catalog No. |
Particulars |
NML20800 |
Bar Gel Polyacrylamide Electrophoresis Apparatus Rectangular |
Polyacrlamide Vertical Slab Gel Mechanism, Student
It is very essential equipment to study proteins, enzymes & nucleodies. These gels are made as slabs & electrophoresis is accomplished vertically.This vertical slab Gel mechanism has cathode chamber at top & anode chamber at bottom. Polyacrylamide gel moulded in a glass sandwich & sample cells are made on top by using suitable well forming combs. The cathode chamber is notched so as to create buffer contact with the gel on top while the bottom of the gel is in contact with the anode reservoir. This mechanism electrophoresis has 8x7cm gel. Gel can be casted of 0.5, 1.0 or 1.5mm thickness in this mechanism. Student Model minimizes the cost of buffer. The elementry unit consists of detachable platinum electrode assembly(2 nos.), Glass Plates Notched & Rectangular, Teflon Comb 7 wells 1 mm, Spacers 1mm(3 nos.), clamp with screw, gasket fixed, leveling screws & connecting cord.
Catalog No. |
Particulars |
NML20820 |
Polyacrlamide Vertical Slab Gel Mechanism, Student |
Polyacrlamide Vertical Slab Gel Mechanism, Universal
This is a laboratory scale mechanism. This electrophoresis 16x20 cm. & can accomplished 13 samples simultaneously. Similar to Polyacrlamide Vertical Slab Gel Mechanism, Student.
Catalog No. |
Particulars |
NML20850 |
Polyacrlamide Vertical Slab Gel Mechanism, Universal |
Accessories For Polyacrlamide Vertical Slab Gel Mechanism, Universal
Accessories For Polyacrlamide Vertical Slab Gel Mechanism Universal
- Accessory 1
Stabilized D.C. Power Supply : this is very ideal to accomplish for routine works coarse & fine control knobs are provide to Set at any voltage from 0 to 300 & constant current up to 100 mA.
- Accessory 2
Stabilized D.C. Power Supply with digital control & display : This is provided with short circuit & overload protection with polarity reverse switch. Coarse & fine control knobs are provide to Set at any voltage from 0 to 300 & constant current up to 100 mA.
- Accessory 3
Gel casting mechanism with levelling table & gel holder.
- Accessory 4
Glass plates notched & rectangular (1 pair)
- Accessory 5
Platinum electrode assembly (Set of 2)
- Accessory 6
Teflon comb 13 well 0.5 mm
- Accessory 7
Teflon comb 13 well 1.0 mm
- Accessory 8
Teflon comb 13 well 1.5 mm
- Accessory 9
Teflon spacers 0.5 mm (Set of 6)
- Accessory 10
Teflon spacers 1.0 mm (Set of 6)
- Accessory 11
Teflon spacers 1.5 mm (Set of 6)
- Accessory 12
Acrylic spacers 1.0 mm (Set of 6)
- Accessory 13
Acrylic spacers 1.5 mm (Set of 6)
- Accessory 14
Spare Lid
- Accessory 15
Acrylic clamp with screws (1 Set)
- Accessory 16
Adhesive tape for sealing glass sandwich
- Accessory 17
Gel sealing gasket (Set of 3)
- Accessory 18
Gradient maker Cylindrical 25+25=50Ml.
- Accessory 19
Leveling screws (Set of 6)
Catalog No. |
Particulars |
NML20860 |
Accessory 1 |
NML20861 |
Accessory 2 |
NML20862 |
Accessory 3 |
NML20863 |
Accessory 4 |
NML20864 |
Accessory 5 |
NML20865 |
Accessory 6 |
NML20866 |
Accessory 7 |
NML20867 |
Accessory 8 |
NML20868 |
Accessory 9 |
NML20869 |
Accessory 10 |
NML20870 |
Accessory 11 |
NML20871 |
Accessory 12 |
NML20872 |
Accessory 13 |
NML20873 |
Accessory 14 |
NML20874 |
Accessory 15 |
NML20875 |
Accessory 16 |
NML20876 |
Accessory 17 |
NML20877 |
Accessory 18 |
Polyacrlamide Vertical Slab Gel, Dual Universal Mechanism
This dual universal mechanism is to study large number of samples of isoenzymes & other heat liable proteins. Platinum electrodes - cathode on top & anode at the bottom are mounted at centre to provide uniform electrical flow. Cold water at desirable temperature can be circulated in the closed cathode chamber to control the gel temperature. This mechanism is to perform two 16x14cm gels & analysis up to 26 samples simultaneously in 5-6 hrs. In this mechanism gel can be casted of 0.5, 1.0 or 1.5mm thickness. When samples containing several components are to be studied, this is an ideal mechanism, which gives good result. The elementary unit consists of anode reservoir, cathode reservoir with heat exchanger, glass plates : notched & rectangular(2 sets), teflon combs 13 well(2 nos.), 1mm, Teflon spacers 1.0mm(6 nos.), clamp with screws lid, connecting cord.
Catalog No. |
Particulars |
NML20880 |
Polyacrlamide Vertical Slab Gel, Dual Universal Mechanism |
Accessories For Polyacrlamide Vertical Slab Gel, Dual Universal Mechanism
Accessories For Polyacrlamide Vertical Slab Gel, Dual Universal Mechanism
- Accessory 1
Stabilized D.C. Power Supply : This is very ideal to accomplish for routine works coarse & fine control knobs are provide to set at any voltage from 0 to 300 & constant current up to 100 mA.
- Accessory 2
Stabilized D.C. Power Supply with digital control & display : This is provided with short circuit & over load protection with polarity reverse switch, coarse & fine control knobs are provide to set at any voltage from 0 to 300 & constant current up to 100 mA.
- Accessory 3
Get casting unit with leveling table & gel holder Dual.
- Accessory 4
Glass plates notched & rectangular (1 pair)
- Accessory 5
Teflon Comb 13 well 0.5 mm
- Accessory 6
Teflon Comb 13 well 1.0 mm
- Accessory 7
Teflon Comb 13 well 1.5 mm
- Accessory 8
Teflon Spacers 0.5 mm (Set of 6)
- Accessory 9
Teflon Spacers 1.0 mm (Set of 6)
- Accessory 10
Teflon Spacers 1.5 mm (Set of 6)
- Accessory 11
Acrylic Spacers 1.0 mm (Set of 6)
- Accessory 12
Acrylic Spacers 1.5 mm (Set of 6)
- Accessory 13
Gel sealing gasket (Set of 3)
- Accessory 14
Acrylic clamp with screw (1 set)
Catalog No. |
Particulars |
NML20890 |
Accessory 1 |
NML20891 |
Accessory 2 |
NML20892 |
Accessory 3 |
NML20893 |
Accessory 4 |
NML20894 |
Accessory 5 |
NML20895 |
Accessory 6 |
NML20896 |
Accessory 7 |
NML20897 |
Accessory 8 |
NML20898 |
Accessory 9 |
NML20899 |
Accessory 10 |
NML20900 |
Accessory 11 |
NML20901 |
Accessory 12 |
NML20902 |
Accessory 13 |
NML20903 |
Accessory 14 |