Educational Equipments Manufacturer, Exporters & Suppliers - School Educational Equipments Manufacturers & Exporters of Educational Equipments for Lab. Science Lab Products, Teaching Aids, Classroom Instruments, Educational Laboratory
AUTO1000 - Single Shoe Brake - Working Model
The model consists of a brake drum, mounted on a shaft free to rotate in bearings, provided with brake lever, complete on iron base.
AUTO1005 - Double Shoe Brake - Working Model
Model consists of a brake drum, provided with two levers carrying shoes. A linkage is used to apply the braking force at the free end bell crank lever. Complete on iron base.
AUTO1010 - Band Brake - Working Model
Consists of a brake drum mounted on a shaft, free to rotate in bearings. A flexible band is wrapped partly around the drum. Brake force can be applied with the help of Lever. Complete on iron base.
AUTO1015 - Band & Block Brake - Working Model
The model is similar to the Band Brake Model but rubber blocks are attached to the band. Complete on iron base.
AUTO1020 - Mechanical Disc Brake - Working Model
Properly constructed model, complete on base with operating lever.
AUTO1025 - Hydraulic Disc Brake Actual Working
Suitably sectionised full size unit. Consisting of original parts such as :- master cylinder assembly, Disc, caliper, hydraulically operated piston assembly and necessary connections. Completed with operating lever and mounted on heavy iron stand.
AUTO1030 - Hydraulic Drum Brake Actual Working (Single Drum)
Suitably sectionised full size unit. Consisting of original parts such as :- master cylinder assembly, wheel cylinder, brake shoes, brake drums and necessary connections. Completed with operating lever and mounted on heavy iron stand.
AUTO1035 - Hydraulic Drum Brake Actual Working (Two Drum)
AUTO1040 - Hydraulic Drum Brake Actual Working (Four Drum)
AUTO1045 - Hydraulic Brake Actual Working - Front Disc & Rear Drum
AUTO1050
- Internally Expanding - Mechanical Drum Brake System
The model consists of a brake drum, two shoes are pivoted on pins. Braking action can be seen due to application of the force on the cam-lever.
AUTO1055 - Vacuum Assisted Hydraulic Drum Brake With Vacuum Booster & Motorised Vacuum Pump
Suitably sectionised full size unit. Consisting of original parts such as :- vacuum booster with master cylinder assembly, wheel cylinder, brake shoes, brake drums, motorised vacuum pump and necessary connections. Completed with operating lever and mounted on heavy iron stand.
AUTO1060 - Air Brake Actual Working
Suitably sectionised full size unit. Consisting of original parts such as :- air tank, air booster, brake shoes, brake drums, mechanically operated lever and necessary connections. Completed with operating lever and mounted on heavy iron stand.
AUTO1065 - Anti Lock Braking System (ABS) Trainer
All modern car are now days fitted with anti lock braking system. This trainer helps the students to understand the working of ABS. The trainer consists of the following parts.
- 1. Control Panel,
- 2. Break Light,
- 3. ECU,
- 4. ABS Hydraulic Activator,
- 5. Break Lever,
- 6. Pressure Gauges,
- 7. Common Pressure Gauge.
An anti-lock braking system (ABS) is a safety system that prevents the wheels on a motor vehicle from locking up (or ceasing to rotate) while braking. A rotating road wheel allows the driver to maintain steering control under heavy braking by preventing a skid and allowing the wheel to continue interacting tractively with the road surface as directed by driver steering inputs. ABS offers improved vehicle control and decreases stopping distances on dry and especially slippery surfaces for many drivers, but on loose surfaces like gravel and snow-on-pavement it can slightly increase braking distance, while still improving vehicle control. Stopping a car in a hurry on a slippery road can be very challenging. Anti-lock braking systems (ABS) take a lot of the challenge out of this sometimes nerve-wracking event. In fact, on slippery surfaces, even professional drivers can't stop as quickly without ABS as an average driver can with ABS.