Educational Equipments Manufacturer, Exporters & Suppliers - School Educational Equipments Manufacturers & Exporters of Educational Equipments for Lab. Science Lab Products, Teaching Aids, Classroom Instruments, Educational Laboratory
Serological Water Bath Thermostatic Controlled (without rack and thermometer)
Double walled, inside made of stainless steel 304 grade and outside mild sheet painted with attractive stove enamel. Temperature is controlled by a hydraulic thermostat from 5°C above ambient to 100°C with a sensitivity of ± 0.5°C fitted with ISI mark Tublar Element. Bath consists of 2 pilot lamps & on/off switch, to work on 220/230 Volts A.C.
Item Code |
Size |
Capacity |
Type |
SE170 |
300 x 250 x 175 mm (for 2 racks) |
13 Ltr |
With Thermostat |
SE171 |
300 x 250 x 175 mm (for 2 racks) |
13 Ltr |
With Thermostat & Stirrer with an accuracy of ± 2ºC |
SE172 |
300 x 250 x 175 mm (for 2 racks) |
13 Ltr |
With Stirrer & PID Based Digital Controller cum Indicator with an accuracy of ± 1ºC |
SE173 |
325 x 300 x 175 mm (for 4 racks) |
17 Ltr |
With Thermostat |
SE174 |
325 x 300 x 175 mm (for 4 racks) |
17 Ltr |
With Thermostat & Stirrer with an accuracy of ± 2ºC |
SE175 |
325 x 300 x 175 mm (for 4 racks) |
17 Ltr |
With Stirrer & PID Based Digital Controller cum Indicator with an accuracy of ± 1ºC |
SE176 |
450 x 300 x 175 mm (for 6 racks) |
23 Ltr |
With Thermostat |
SE177 |
450 x 300 x 175 mm (for 6 racks) |
23 Ltr |
With Thermostat & Stirrer with an accuracy of ± 2ºC |
SE178 |
450 x 300 x 175 mm (for 6 racks) |
23 Ltr |
With Stirrer & PID Based Digital Controller cum Indicator with an accuracy of ± 1ºC |
SE179 |
600 x 300 x 175 mm (for 8 racks) |
31 Ltr |
With Thermostat |
SE180 |
600 x 300 x 175 mm (for 8 racks) |
31 Ltr |
With Thermostat & Stirrer with an accuracy of ± 2ºC |
SE181 |
600 x 300 x 175 mm (for 8 racks) |
31 Ltr |
With Stirrer & PID Based Digital Controller cum Indicator with an accuracy of ± 1ºC |
- Note : NPL Tracibitlity & calibration certificate of controller is also provided.
- Water Bath Rectangular Double Wall : (without thermometer)
- Double walled, inside made of stainless steel 304 grade and out side mild sheet painted with attractive stove enamel. Temperature is controlled by a hydraulic thermostat from 5°C above ambient to 100°C with sensitivity of ± 0.5°C fitted with ISI mark Tublar Element. Bath consists of 2 pilot lamps & on/off switch, to work on 220/230 Volts A.C.
Item Code |
Size |
SE165 |
300 x 250 x 100 mm (6 Holes of 75 mm Dia.) |
SE167 |
425 x 325 x 100 mm (12 Holes of 75mm Dia.) |
High Precision Water Bath :
- Suitable for all laboratory application requiring constant temperature to high degree of accuracy ± 0.1°C or better. Temperature is controlled by Digital controller cum Indicator PID Based, from 5°C above ambient to 95°C. Double walled, inside made of stainless steel 304 grade and outside mild steel sheet painted with attractive stove enamel fitted with ISI mark Tublar Elements. A Glass window is fixed on the front side. Supplied complete with stirring arrangement and Goval cover. To work on 220/230 Volts. A.C.
Item Code |
Size |
Capacity |
SE185 |
430 x 230 x 265 mm. |
26 Ltr |
Note : NPL Tracibility calibration certificate of controller is also provided. |
Serological Water Bath
These units are double walled with inner chamber made up of S.S. Sheet and outside of M.S. duly powder coated. The gap between the walls is fitted with special grade glass wool in order to avoid thermal losses. The inner chamber fitted with immersion type heating element is covered with perforated removable diffuser tray. The cover is provided with the unit as a standard accessory. Temperature from ambient to 100°C is controlled by Hydraulic capillary type thermostat with accuracy of + 1° C . Workable on 220V AC 50Hz Single Phase.
Chamber Size In mms |
Suitable Racks |
Cap. (Approx.) |
Code |
300x175x175 |
1 rack |
12 L |
SLEP1000 |
300x250x175 |
2 rack |
14 L |
SLEP1002 |
375x300x175 |
4 rack |
18 L |
SLEP1004 |
455x300x175 |
6 rack |
25 L |
SLEP1006 |
605x300x175 |
8 rack |
32 L |
SLEP1008 |
Optional(Extra Cost)
- Microprocessor PID digital temp. indicator cum contrroller.
- Stirrer with 1/20 Hp motor with S.S. rod blade.
- Auto cut off device when water level is low.
Water Bath Recangular Type I
It is a double walled unit inner chamber made up of S.S. Sheet and outside of M.S. duly powder coated. The gap between the walls is fitted with special grade glass wool in order to avoid thermal losses.
Concentric rings can be removed to accommodate containers of various sizes. Temperature from ambient to 100°C is controlled by Hydraulic capillary type thermostat with accuracy of ± 1° C . Workable on 220V AC 50Hz Single Phase.
Chamber Size In mms |
Holes |
Cap. (Aprox.) |
Code |
300x250x100 |
6 holes of 75 mm |
8 L |
SLEP1028 |
355x405x100 |
12 Holes of 75mm |
15 L |
SLEP1030 |
Optional (Extra Cost)
- Microprocessor PID digital temp. indicator cum contrroller.
- Auto cut off device when water level is low.
Water Bath Recangular Type II
Specifications same as above but with Single S.S. Wall Construction
Chamber Size In mms |
Holes |
Cap. (Aprox.) |
Code |
300x250x100 |
6 holes of 75 mm |
8 L |
SLEP1050 |
355x405x100 |
12 Holes of 75mm |
15 L |
SLEP1052 |
Water Bath Precison
Thermostatically controlled. Double walled. Toughened glass window on two opposite sides for observations without disturbing temperature. Complete with stirrer. Temperature range 100°C. Workable on 220V AC 50Hz single phase.
Chamber Size In mms |
Chamber Size In Inch |
Code |
425x250x225 |
17"x10"x9" |
SLEP1072 |
425x375x375 |
18"x15"x15" |
SLEP1074 |
650x450x450 |
18"x15"x15" |
SLEP1076 |
Optional (Extra Cost)
- Microprocessor PID digital temp. indicator cum contrroller.
- Auto cut off device when water level is low.
Water Bath Tissue Flotation
Double walled round construction. Inner chamber stainless steel/black anodized aluminum and outer made out of mild steel painted in epoxy powder coating. Thermostatic control, temperature range from ambient to 80°C. Complete with indicators, wire & plug. To work on 220V AC.
Chamber Size In mms (dia x depth) |
Code |
200x75 |
SLEP1096 |
250x125 |
SLEP1098 |
Water Bath Incubator Shaker
Similar to other water bath but fitted with inbuilt shaker for differrent experiments demanding shaking at constant speed under controlled temerature conditions. The temp. is controlled by capillary type thermostat from ambient to 100°C.
RPM range :- 40-140 with variable electronic speed regulattor workable on 220V AC 50 Hz Single Phase.
Chamber Size In mms (dia x depth) |
Capacity (L) |
Code |
275x275x150 |
12 L |
SLEP1118 |
405x300x150 |
18 L |
SLEP1120 |
Optional (Extra Cost)
- Microprocessor PID digital temp. indicator cum contrroller.
- Digital RPM meter
- Auto cut off device when water level is low.
Constant Temperature Refrigerated Liquid Bath
Outer body is made of thick mild steel duly powder coated painted and inner chamber is made up of 304 grade stainless steel. Lid is also double walled properly insulated and is with locking facility. Whole unit is mounted on sturdy angle iron frame the cooling coils are brazes to the outer side of S.S. chamber thus ensuring perfect and uniform cooling. Insulation is done with thick glass wool to prevent any temp. loss. For attaining the temp. below ambient, the refrigeration is done through CFC free hermetically sealed compressor and & for attaining the temp. above ambient, heating is done with immersion type heating element. Constant Temperature Refrigerated Liquid Bath RSTI-141 Series Fitted with stirrer for temperature unifomity throughout the chamber. Temprature range is from 5°C to 90°C is controlled by dual Display Microprocessor PID Digital Temprature Indicator cum Controller with a accuracy of +0.5°C digital temp. To work on 220/230volts AC supply. The unit is also fitted with a FHP PUMP for circulating the cooled liquid to an external source such as condenser coils, etc.
Chamber Size In mms (dia x depth) |
Capacity (L) |
Code |
500x250x250 |
32.5 L |
SLEP1140 |
Low Temperature Refrigerated Liquid Bath
General specifications Same as SLEP1140, but temperature range is -10°C.
PUFF insulation in the chamber & can be used as a circulating water bath in external instruments.
Chamber Size In mms (dia x depth) |
Capacity (L) |
Code |
500x250x250 |
32.5 L |
SLEP1160 |
Tissue Floatation Bath
Code: SLEP1180
Tissue Floatation Bath has been developed using microprocessor controls and a modular design that has improved reliability and precision. Corrosion resistant material for durability. Tissue Floatation Bath RSTI-3D Series Temperature settings are controlled by feature touch buttons for accurate and precise control and the easy to read LED display show both, set temperature and actual temperature. The probe has a thermostat sensor inside that turns off when it is lifted up and re-starts when placed back in the basin.
Technical Specifications :
- Temperature Range : ambient to 90° C
- Temperature Tolerance : + 1° C
- Bath Dimensions inner : 300 x 200 x 40mm