Code:SLEP7100

Glass Crusher Incinerator to our customers. This is manufactured using quality components. To supply only, manually fed, light diesel fuel, domestic incinerator with a capacity of not less than 600 kW capable of burning solid waste & sludge simultaneously, complete with automatic burner, flue gas pipe expansion compensator, pre-fabricated flue gas duct, motorized flue gas damper, ID fan & drive, free standing stub chimney etc. These products reduce the bottles to 20% their original size to glass grains with out any sharp edges. Complete with motor control center & all safeties.

Specifications:

• Voltage: 400 V.
• Phase: 3 Phase.
• Capacity: 800 Bottles per hour.
• Size: 700X660X400 mm.
• Daily service tank: 400 Lt.

Code:SLEP7105

Bottle Crusher Incinerator that are compact and efficient, combining safety and ease of use with performance, functionality and reliability. Incinerator Bottle Crusher are used throughout the hospitality sector from Nightclubs to Bars to Hotels & Restaurants or any recycling operation.To save space, time and money the Incinerator Bottle Crusher is the solution.

Features:

• Patents apply to the PEL Bottle Crusher
• Reduce glass to cutlet size
• Volume feed machine
• Rated through-put: over two tonne per hour
• Extraction system, filters fine dust created during crushing
• Mobile for ease of movement
• System used is low noise operation and highly energy efficient
• Heavy duty construction
• Small footprint Optional Extras
• Auto-start and stop
• Direct fed from bar
• Galvanized body
• Service contract

Features:

• Power Supply: 220 to 230 V
• Motor: 1.8 kW
• Reduces bottle volume: 5:1

Code:SLEP7110

Glass Crusher Incinerator which are compact and efficient, combining safety and ease of use with performance, functionality and reliability. Glass Crushers are used throughout the hospitality sector from Nightclubs to Bars to Hotels & Restaurants or any recycling operation. To save space, time and money the Glass Crusher is the solution.

Features:

• Patents apply to the PEL Glass Crusher
• Volume feed machine
• Rated through-put: over two tonne per hour
• Extraction system, filters fine dust created during crushing
• Mobile for ease of movement
• System used is low noise operation and highly energy efficient
• Heavy duty construction
• Small footprint Optional Extras
• Auto-start and stop
• Direct fed from bar
• Galvanized body
• Service contract

Specifications:

• Material: Stainless steel
• Height: 61"
• Voltage: 220 V
• Motor: 2 HP
• Reduces bottle volume: 5:1

Code:SLEP715

Rotary Kiln Incinerator that help in carrying out disposal of waste materials. Treated wastes might be industrial waste or domestic. These systems reduce combustible waste into exhaust gaseous products and the incombustible waste into ash. Our systems are capable of reducing the weight of the wastes to a fraction of their original weight. Our products are duly lined with high grade cast-able cement and fitted with high quality gaskets to seal the doors when closed. And limit switch will be provided.

Features:

• Ash removal doors are provided in the primary, secondary and settling chambers
• Separate floor mounted weatherproof control panel housing operation in automatic control switches, digital type temp. controller for primary and secondary chamber
• Temp. indicator for Scrubber and stack ON/OFF switches, fuses, sensors, hooter etc. complete with in all respect-duly lined with refractory materials and fitted with high quality packing to seal the door

Specifications:

• Centrifugal Capacity: 500 m³/Hr
• Static pressure: 100 mm WC
• HP: 1 HP
• Material: Mild Steel
• Duct line: 4 mm thick
• Inside portion: 25 mm thick
• Dia: 400 mm
• Maintenance door: 5 mm thick

Code:SLEP7120

Kitchen Waste Incinerator that are utilized for disposing off the waste of kitchen. It can be installed without much effort, require minimal maintenance. The new innovation is industrial, incinerators which have a number of advantages like they can run with the help of electric power, oil or gas.

Features:

Specification	U.S Standard	Metric System
Length	55" (69" With Cremation Burner)	1.3m (1.7m with Cremation Burner)
Width	40" (54" With Control Panel)	1.0m (1.3m with Control Panel)
Height	65" (75" With Afterburner)	1.6m (1.9m with Afterburner)
Weight	5,200 lbs.	2,358 Kg
Gas Pressure	Natural Gas 7" W.C./Propane Gas 11" W.C.	Natural Gas 1.7 kPa W.C.
		Propane 2.7 kPa W.C.
Power Requirements	110V, Single Phase, 30 AMPS	----
Incineration Rate	50 lbs/hour	22 Kg/hour
Weight Capability	200 lbs	90 Kg
Stack Height From Grade	Minimum 15'	4.5m
Stack Sections	18" O.D 4 1/2" Firebrick Walls/Cast-able Refractory Lining/(Hearth and Ceiling)	0.4m O.D
Refractory/Insulation	3" 1900 - Board Insulation	0.11m Firebrick Walls /Cast-able Refractory Lining (Hearth and Ceiling)
		0.07m 1900 - Board Insulation
Chamber Dimensions	Length: 32"	0.8m
	Width: 26"	0.6m
	Height: 25"	0.6m
	12 Cubic Feet	0.288 Cubic Meters
Burner output	Maximum Input Rating 750,000 BTU's per hr/Afterburner Maximum 400,000 BTU's per hr/Modulation Minimum 100,000 BTU's per hr/Cremation Burner 350,000 BTU's per hr	791,250 KJ per hr/422,000 KJ per hr/105,500 KJ per hr369,250 KJ per hr
Air Requirements	Outside air inlet louvers in the room /located at or below burner height, capable of passing 2,500 CFM of free air	Outside air inlet louvers in the room located at or below burner height, capable of passing 1.173 Cubic meters per second

Code:SLEP7125

Municipal Waste Incinerator. These waste incinerators are used to dispose food waste, plastics, glass, metal, stones, agro waste, cotton waste, liquid, solid, and semi-solid waste. These incinerators can be customized as per requirements depending upon the required capacity and the kind of waste. These products are highly appreciated for their automatic waste feeding system with hydraulic power pack.
We provide fuel efficient technology for low cost waste burning. When you want to manage a very large quantity of waste, the question of heat recovery, municipal waste refuse derived fuel plant, fuel pellets, municipal waste compost plants (waste to compost plant), bio gas plant, methane gas & electricity generation plant, power generation with incineration, etc. is very natural. We also provide such waste management services as per the requirements.

Features:

• Primary Chamber with Fully Automatic Burner Assembly (With Fire Proof Bricks Lining)
• Secondary Chamber with Automatic Burner (With Fire Proof Bricks Lining)
• Automatic Waste Feeding System, with Hydraulic Power Pack
• Venture Scrubber with SS Shower
• Scrubber with SS Shower for Wet Scrubbing
• ID Fan with SS Impellers
• Chimney with Ladder, Platform & Sampling point
• Duct Line with Inside Lining
• Heavy Construction for Long Life
• Special Design as per your Liquid Waste and as per your Required Capacity
• Incineration as per Emission Standard

Specifications:

• Capacity: 100 kg/hr to 5000 kg/hr
• Material: Stainless steel

Code:SLEP7130

A mobile incinerator is an incineration system mounted on a semi-trailer. Modern incinerators enable complete and sterile incineration of waste. They can be operated virtually anywhere.
A modern mobile incinerator unit (MIU) is capable of incinerating waste at a temperature of up to 1,200°C (2,192°F). This means, it is designed to incinerate all kinds of waste as well as infected hazardous waste. This satisfies the requirement that, waste of hospitals and health facilities must be burnt at a minimum temperature of 1,100°C (2,012°F) acc. to the rules of environmental protection. It can also be used to dispose of household waste, as a measure of environment protection.Mobile incinerators provide a useful addition to the available standards in waste management.The elimination of hazardous and toxic waste on site is one of the major uses of mobile incinerators.A mobile incinerator unit is the most suitable product for countries that are starting to tackle waste management, because in such cases, there are no previous statistics about the amount of waste and its composition. Therefore all initial data is based on assumptions only. Until more accurate data can be collected, mobile incinerator units help make the transition, with their mobility and flexibility.

Applications of Mobile Incinerator units

• Domestic waste
• Industrial waste
• Medical waste
• Cadaver or carrion of animals
• Solid and paste-like chemical residues with moisture content

Specifications:

• Capacity: 100 kg/hr to 5000 kg/hr
• Material: Stainless steel

Code:SLEP7135

A mobile incinerator is an incineration system mounted on a semi-trailer. Modern incinerators enable complete and sterile incineration of waste. They can be operated virtually anywhere.
A modern mobile incinerator unit (MIU) is capable of incinerating waste at a temperature of up to 1,200 °C (2,192 °F). This means, it is designed to incinerate all kinds of waste as well as infected hazardous waste. This satisfies the requirement that, waste of hospitals and health facilities must be burnt at a minimum temperature of 1,100°C (2,012°F) acc. to the rules of environmental protection. It can also be used to dispose of household waste, as a measure of environment protection.

Applications of mobile incineraor units

• Domestic waste
• Industrial waste
• Medical waste
• Cadaver or carrion of animals
• Solid and paste-like chemical residues with moisture content