Educational Equipments Manufacturer, Exporters & Suppliers - School Educational Equipments Manufacturers & Exporters of Educational Equipments for Lab. Science Lab Products, Teaching Aids, Classroom Instruments, Educational Laboratory
Rotary Vacuum Evaporator, Diagonal Condenser
Rotary Vacuum evaporator provided with LED display for R.P.M control, motorized lift arrangement for glass assembly control up to 100mm, lifting up/down through soft touch switches, digital temperature controlled water/oil bath from ambient + 5° C to 180°C, capacity 4.5 litre, geared drive unit offers smooth speed rotation from 20 to 180 R.P.M., water circulation and vacuum inlet assembly is fitted at the rear of the lift to reduce the pressure at glass joints of condenser. Diagonal double coiled condenser, pear(kjeldhal) shaped evaporating flask capacity 800ml, receiving flask capacity one liter fitted with a ball joint, feeding tube, vapour path tube, provided with rubber tube, pressure tube, seal, clips and spring a complete working unit. Patented Product.
Accessory at extra cost:
- Accessory 1: Suitable oil free vacuum pump for rotary evaporator with Vacuum gauge & Regulator.
- Accessory 2: Condenser double coiled with S- 35cup. with three opening for vacuum and cooling.
- Accessory 3: Vapour Path tube B-24, B-29
- Accessory 4: Gasket Seal for vapour tube.
- Accessory 5: Gasket Seal for Special Chemicals
- Accessory 6: Receiving Flask with S-35 cup (socket) joint capacity 1000ml.
- Accessory 7: Evaporating Flask Kjeldhal capacity 800ml. B-24
- Accessory 8: Evaporating Flask Kjeldhal capacity 500ml. B-24
- Accessory 9: Evaporating Flask Kjeldhal capacity 300ml. B-24
- Accessory 10: Evaporating Flask Kjeldhal capacity 100ml. B-24
- Accessory 11: Tension Spring to hold condenser
- Accessory 12: Standard Joint clip B-24
- Accessory 13: Ball joint Clip with screw lock
- Accessory 14: Glass Safety Trap
Catalog No. |
Particulars |
SLEP2800 |
Rotary Vacuum Evaporator, Diagonal Condenser |
SLEP2801 |
Accessory 1 |
SLEP2802 |
Accessory 2 |
SLEP2803 |
Accessory 3 |
SLEP2804 |
Accessory 4 |
SLEP2805 |
Accessory 5 |
SLEP2806 |
Accessory 6 |
SLEP2807 |
Accessory 7 |
SLEP2808 |
Accessory 8 |
SLEP2809 |
Accessory 9 |
SLEP2810 |
Accessory 10 |
SLEP2811 |
Accessory 11 |
SLEP2812 |
Accessory 12 |
SLEP2813 |
Accessory 13 |
SLEP2814 |
Accessory 14 |
Rotary Vacuum Evaporator, Vertical Condenser
Rotary vacuum evaporator provided with LED display for R.P.M control, motorized lift arrangement for glass assembly control up to 100mm, lifting up/down through soft touch switches, digital temperature controlled water/oil bath from ambient + 5° C TO 180°C, capacity 4.5 litre, geared drive unit offers smooth speed rotation from 20 to 180 R.P.M., water circulation and vacuum inlet assembly is fitted at the rear of the lift to reduce the pressure at glass joints of condenser. Vertical double coiled condenser, pear(kjeldhal) shaped evaporating flask capacity 800ml, receiving flask capacity one liter fitted with a ball joint, Feeding tube, vapour path tube, provided with rubber tube, pressure tube, seal, clips and spring a complete working unit. (Patented Product)
Accessory at extra cost:
- Accessory 1: Suitable oil Free vacuum pump for rotary Evaporator with vacuum gauge & Regulator
- Accessory 2: Vertical Condenser double coiled
- Accessory 3: Cone adapter of condenser for vacuum
- Accessory 4: Vapour path tube B-24, B-29
- Accessory 5: Gasket seal for vapour tube (VITON)
- Accessory 6: Gasket seal for specific chemicals
- Accessory 7: Feed tube for condenser
- Accessory 8: Receiving flask with S-35 cup (socket) joint capacity 1000ml.
- Accessory 9: Evaporating Flask Kjeldhal capacity 800 ml. B-24
- Accessory 10: Evaporating Flask Kjeldhal capacity 500 ml. B-24
- Accessory 11: Evaporating Flask Kjeldhal capacity 300 ml. B-24
- Accessory 12: Evaporating Flask Kjeldhal capacity 100 ml. B-24
- Accessory 13: Tension Spring to hold condensor
- Accessory 14: Standard Joint Clip B-24
- Accessory 15: Ball joint Clip S-35 with screw lock
- Accessory 16: Glass Safety Trap
Catalog No. |
Particulars |
SLEP2824 |
Rotary Vacuum Evaporator, Vertical Condenser |
SLEP2825 |
Accessory 1 |
SLEP2826 |
Accessory 2 |
SLEP2827 |
Accessory 3 |
SLEP2828 |
Accessory 4 |
SLEP2829 |
Accessory 5 |
SLEP2830 |
Accessory 6 |
SLEP2831 |
Accessory 7 |
SLEP2832 |
Accessory 8 |
SLEP2833 |
Accessory 9 |
SLEP2834 |
Accessory 10 |
SLEP2835 |
Accessory 11 |
SLEP2836 |
Accessory 12 |
SLEP2837 |
Accessory 13 |
SLEP2838 |
Accessory 14 |
SLEP2839 |
Accessory 15 |
SLEP2840 |
Accessory 16 |
Rotary Vacuum Evaporator, Cold Trap Condenser
Rotary vacuum evaporator provided with LED display for R.P.M. control, motorized lift arrangement for glass assembly control up to 100mm, lifting up/down through soft touch switches, digital temperature controlled water/oil bath from ambient + 5° C, 180°C, capacity 4.5 litre, geared drive unit offers smooth speed rotation from 20 to 180 R.P.M., vacuum inlet assembly is fitted at the rear of the lift to reduce the pressure at glass joints of condenser, cold trap condenser with opening for vacuum and top reservoir for cooling medium, pear(kjeldhal) shaped evaporating flask capacity 800ml, receiving flask capacity one liter fitted with a ball joint, feeding tube, vapour path tube, provided with rubber tube, pressure tube, seal, clips and spring a complete working unit. (Patented Product)
Accessory at extra cost:
- Accessory 1: Suitable oil free vacuum pump for rotary evaporator with Vacuum gauge & Regulator.
- Accessory 2: Cold Trap Condenser With S-35 Cup.
- Accessory 3: Vapour path tube B-24 B-29.
- Accessory 4: Gasket seal for vapour tube (VITON).
- Accessory 5: Gasket seal for specific chemicals.
- Accessory 6: Feed tube for condenser.
- Accessory 7: Receiving flask with S-35 cup (Socket) joint capacity 1000ml.
- Accessory 8: Evaporating Flask Kjeldhal capacity 800ml. B-24
- Accessory 9: Evaporating Falsk Kjeldhal capacity 500ml. B-24
- Accessory 10: Evaporating Flask Kjeldhal capacity 300ml. B-24
- Accessory 11: Evaporating Flask Kjeldhal capacity 100ml. B-24
- Accessory 12: Tension Spring to hold condenser
- Accessory 13: Standard Joint Clip B-24
- Accessory 14: Ball Joint Clip S-35 with Screw Lock
- Accessory 15: Glass Safety Trap
Catalog No. |
Particulars |
SLEP2850 |
Rotary Vacuum Evaporator (Cold Trap Condenser) |
SLEP2851 |
Accessory 1 |
SLEP2852 |
Accessory 2 |
SLEP2853 |
Accessory 3 |
SLEP2854 |
Accessory 4 |
SLEP2855 |
Accessory 5 |
SLEP2856 |
Accessory 6 |
SLEP2857 |
Accessory 7 |
SLEP2858 |
Accessory 8 |
SLEP2859 |
Accessory 9 |
SLEP2860 |
Accessory 10 |
SLEP2861 |
Accessory 11 |
SLEP2862 |
Accessory 12 |
SLEP2863 |
Accessory 13 |
SLEP2864 |
Accessory 14 |
SLEP2865 |
Accessory 15 |
Rotary Vacuum Evaporator, Diagonal Condenser, Thermostatic Temperature Control
This model of evaporator is supplied complete with geared drive non sparking noiseless motor offering smooth speed control by analog knob upto 200 RPM, jack arrangement is fitted on tapered front base for positioning glass assembly, double walled water bath thermostatically controlled temperature, glass condenser double coiled with three opening for vacuum and cooling, pear (kjeldhal) shaped evaporating flask capacityacity 800 ml., receiver flask capacityacity one litre fitted with a ball joint, feeding tube and vapour path tube provided with a Rubber tube, Pressure tube, seal, clips and spring a complete working unit. (Patented Product)
Accessory at extra cost:
- Accessory 1: Suitable oil free vacuum pump for rotary evaporator with vacuum gauge & regulator
- Accessory 2: Condenser double coiled with S-35 cup.
- Accessory 3: Gasket Seal for Vapour path Tube (VITON)
- Accessory 4: Gasket Seal for specific chemical
- Accessory 5: Vapour Path Tube B-24, B-29
- Accessory 6: Feed Tube for condenser without Teflon pipe
- Accessory 7: Evaporating flask R.B. 1 litre B-24 socket
- Accessory 8: Receiving Flask with S-35 Ball joint capacity. 1000 ml.
- Accessory 9: Evaporating Flask Kjeldhal capacity 800ml B-24
- Accessory 10: Evaporating Flask Kjedhal capacity 500ml. B-24
- Accessory 11: Evaporating Flask Kjedhal capacity 300ml. B-24
- Accessory 12: Evaporating Flask Kjedhal capacity 100ml. B-24
- Accessory 13: Tension Spring to hold condenser
- Accessory 14: Wire clip to hold vapour tube and boiling flask
- Accessory 15: Ball joint clip S-35 with Screw lock
- Accessory 16: Water Bath Double walled inner S.S. with Thermostaic Temperature Controller
- Accessory 17: Spare Heater for water bath
Catalog No. |
Particulars |
SLEP2875 |
Rotary Vacuum Evaporator, Diagonal Condenser, Thermostatic Temperature Control |
SLEP2876 |
Accessory 1 |
SLEP2877 |
Accessory 2 |
SLEP2878 |
Accessory 3 |
SLEP2879 |
Accessory 4 |
SLEP2880 |
Accessory 5 |
SLEP2881 |
Accessory 6 |
SLEP2882 |
Accessory 7 |
SLEP2883 |
Accessory 8 |
SLEP2884 |
Accessory 9 |
SLEP2885 |
Accessory 10 |
SLEP2886 |
Accessory 11 |
SLEP2887 |
Accessory 12 |
SLEP2888 |
Accessory 13 |
SLEP2889 |
Accessory 14 |
SLEP2890 |
Accessory 15 |
SLEP2891 |
Accessory 16 |
SLEP2892 |
Accessory 17 |
Rotary Vacuum Evaporator, Diagonal Condenser, Digital Temperature Control
This model of evaporator is supplied complete with geared drive non sparking noiseless motor offering smooth speed control by analog knob upto 200RPM, jack arrangement is fitted on tapered front base for positioning glass assembly, double walled water bath with digital temperature controller, diagonal glass condenser double coiled with three opening for vacuum and cooling, pear (kjeldhal) shaped evaporating flask capacity 800 ml., receiver flask capacity one litre fitted with a ball joint, feeding tube and vapour path tube provided with a rubber tube, pressure tube, seal, clips and spring a complete working unit. (Patented Product)
Accessory at extra cost:
- Accessory 1: Suitable oil free vacuum pump for rotary evaporator with vacuum gauge & regulator
- Accessory 2: Condenser Double coiled with S-35 cup
- Accessory 3: Gasket seal for vapour tube(Viton)
- Accessory 4: Gasket Seal for specific Chemicals
- Accessory 5: Vapour path tube B-24, B-29
- Accessory 6: Feed tube for condenser
- Accessory 7: Evaporating Flask R. B. 1 litre B-24 socket
- Accessory 8: Receiving Flask with S-35 cup (Socket) joint capacity 1000 ml.
- Accessory 9: Evaporating Flask Kjeldhal capacity 800ml B-24
- Accessory 10: Evaporating Flask Kjeldhal capacity 500ml B-24
- Accessory 11: Evaporating Flask Kjeldhal capacity 300ml B-24
- Accessory 12: Evaporating Flask Kjeldhal capacity 100ml B-24
- Accessory 13: Tension Spring to hold condenser
- Accessory 14: Wire Clip to hold vapour tube and boiling flask
- Accessory 15: Ball Joint clip S-35 with screw lock
- Accessory 16: Water bath double walled inner S.S.With digital Temperature controller
- Accessory 17: Spare Heater for Water bath
Catalog No. |
Particulars |
SLEP2902 |
Rotary Vacuum Evaporator, Diagonal Condenser, Digital Temperature Control |
SLEP2903 |
Accessory 1 |
SLEP2904 |
Accessory 2 |
SLEP2905 |
Accessory 3 |
SLEP2906 |
Accessory 4 |
SLEP2907 |
Accessory 5 |
SLEP2908 |
Accessory 6 |
SLEP2909 |
Accessory 7 |
SLEP2910 |
Accessory 8 |
SLEP2911 |
Accessory 9 |
SLEP2912 |
Accessory 10 |
SLEP2913 |
Accessory 11 |
SLEP2914 |
Accessory 12 |
SLEP2915 |
Accessory 13 |
SLEP2916 |
Accessory 14 |
SLEP2917 |
Accessory 15 |
SLEP2918 |
Accessory 16 |
SLEP2919 |
Accessory 17 |
Rotary Vacuum Evaporator, Vertical Condenser, Thermostatic Temperature Control
This model of evaporator is supplied complete with geared drive non sparkling noiseless motor offering smooth speed control by analog knob upto 200 R.P.M. jack arrangement is fitted on tapered front base for positioning glass assembly. Double walled water bath thermostatically controlled temp, vertical glass condenser double coiled with three opening for vacuum and cooling, pear (kjeldhal) shaped evaporating flask capacityacity 800 ml, receiver flask capacity one litre fitted with a ball joint, feeding tube, vapour path tube provided with a rubber tube, pressure tube, seal, clips, & spring a complete working unit. (Patented Product)
Accessory at extra cost:
- Accessory 1: Suitable oil free vacuum pump for rotary evaporator with vacuum gauge & regulator
- Accessory 2: Vertical condenser double coiled with two outlets for water circulation. With S-3 5 Ball at bottom for connecting to receiving flask, quickfit type joint at top for vacuum, cock for feeding tube on one side while the other side will be connected to motor with ring.
- Accessory 3: Cone Adapter for condenser to Vacuum pump
- Accessory 4: Vapour path tube B-24. B-29
- Accessory 5: Gasket seal for vapour tube (VITON)
- Accessory 6: Gasket Seal for specific Chemicals
- Accessory 7: Feed tube for condenser without Teflon pipe
- Accessory 8: Receiving flask with S-35 cup (socket) joint capacity 1000ml
- Accessory 9: Evaporating flask Kjeldhal capacity 800 ml. B-24
- Accessory 10: Evaporating flask Kjeldhal capacity 500 ml. B-24
- Accessory 11: Evaporating flask Kjeldhal capacity 300 ml. B-24
- Accessory 12: Evaporating flask Kjeldhal capacity 100 ml. B-24
- Accessory 13: Tension spring to hold condensor
- Accessory 14: Wire Clip to hold vapour tube and boiling flask
- Accessory 15: Ball Joint Clip S-35 with screw lock
- Accessory 16: Waterbath double walled inner SS With thermostatic temperature control
- Accessory 17: Spare heater for water bath
- Accessory 18: Glass safety trap
Catalog No. |
Particulars |
SLEP2929 |
Rotary Vacuum Evaporator, Vertical Condenser, Thermostatic Temperature Control |
SLEP2930 |
Accessory 1 |
SLEP2931 |
Accessory 2 |
SLEP2932 |
Accessory 3 |
SLEP2933 |
Accessory 4 |
SLEP2934 |
Accessory 5 |
SLEP2935 |
Accessory 6 |
SLEP2936 |
Accessory 7 |
SLEP2937 |
Accessory 8 |
SLEP2938 |
Accessory 9 |
SLEP2939 |
Accessory 10 |
SLEP2940 |
Accessory 11 |
SLEP2941 |
Accessory 12 |
SLEP2942 |
Accessory 13 |
SLEP2943 |
Accessory 14 |
SLEP2944 |
Accessory 15 |
SLEP2945 |
Accessory 16 |
SLEP2946 |
Accessory 17 |
SLEP2947 |
Accessory 18 |
Rotary Vacuum Evaporator, Vertical Condenser, Digital Temperature Control
This model of evaporator is supplied complete with geared drive non sparkling noiseless motor offering smooth speed control by analog knob up to 200 RPM. jack arrangement is fitted on tapered front base for positioning glass assembly. Double walled water bath with Digital temperatuere controller, vertical glass condenser double coiled with three opening for vacuum and cooling, pear (kjeldhal) shaped evaporating flask capacity 800 ml, receiver flask capacity one litre fitted with a ball joint, feeding tube, vapour path tube, provided with a rubber tube, pressure tube, seal, clips & spring a complete working unit. (Patented Product)
Accessory at extra cost:
- Accessory 1: Suitable oil free vacuum pump for rotary evaporator with vacuum gauge & regulator
- Accessory 2: Vertical condenser double coiled with two outlets for water circulation. With S-3 5 Ball at bottom for connecting to receiving flask, quickfit type joint at top for vacuum, cock for feeding tube on one side while the other side will be connected to motor with ring.
- Accessory 3: Cone Adapter for condenser to Vacuum pump
- Accessory 4: Vapour path tube B-24. B-29
- Accessory 5: Gasket seal for vapour tube (VITON)
- Accessory 6: Gasket Seal for specific Chemicals
- Accessory 7: Feed tube for condenser without Teflon pipe
- Accessory 8: Receiving flask with S-35 cup (socket) joint capacity 1000ml
- Accessory 9: Evaporating flask Kjeldhal capacity 800 ml. B-24
- Accessory 10: Evaporating flask Kjeldhal capacity 500 ml. B-24
- Accessory 11: Evaporating flask Kjeldhal capacity 300 ml. B-24
- Accessory 12: Evaporating flask Kjeldhal capacity 100 ml. B-24
- Accessory 13: Tension spring to hold condensor
- Accessory 14: Wire Clip to hold vapour tube and boiling flask
- Accessory 15: Ball Joint Clip S-35 with screw lock
- Accessory 16: Waterbath double walled inner SS With thermostatic temperature control
- Accessory 17: Spare heater for water bath
- Accessory 18: Glass safety trap
Catalog No. |
Particulars |
SLEP2957 |
Rotary Vacuum Evaporator, Vertical Condenser, Digital Temperature Control |
SLEP2958 |
Accessory 1 |
SLEP2959 |
Accessory 2 |
SLEP2960 |
Accessory 3 |
SLEP2961 |
Accessory 4 |
SLEP2962 |
Accessory 5 |
SLEP2963 |
Accessory 6 |
SLEP2964 |
Accessory 7 |
SLEP2965 |
Accessory 8 |
SLEP2966 |
Accessory 9 |
SLEP2966 |
Accessory 10 |
SLEP2967 |
Accessory 11 |
SLEP2968 |
Accessory 12 |
SLEP2969 |
Accessory 13 |
SLEP2970 |
Accessory 14 |
SLEP2971 |
Accessory 15 |
SLEP2972 |
Accessory 16 |
SLEP2973 |
Accessory 17 |
SLEP2974 |
Accessory 18 |
Rotary Vacuum Evaporator, Cold Trap Condenser, Thermostatic Temperature Control
This model of evaporator is supplied complete with geared drive non sparkling noiseless motor offering smooth speed control by analog knob upto 200 R.P.M. jack arrangement is fitted on tapered front base for positioning glass assembly. Double walled water bath with thermostatic temperature controller, glass condenser double walled with one opening for vacuum & top reservoir for cooling medium, pear (kjeldhal) shaped evaporating flask capacity 800 ml, receiver flask capacity one litre fitted with a ball joint, feeding tube, vapour path tube provided with a pressure tube, seal, spring & clips a complete working unit. (Patented Product)
Accessory at extra cost:
- Accessory 1: Suitable oil free vacuum pump for rotary evaporator with vacuum gauge & regulator
- Accessory 2: Cold Trap condenser double coiled with two outlets for water circulation. With S-3 5 Ball at bottom for connecting to receiving flask, quickfit type joint at top for vacuum, cock for feeding tube on one side while the other side will be connected to motor with ring.
- Accessory 3: Cone Adapter for condenser to Vacuum pump
- Accessory 4: Vapour path tube B-24 B-29
- Accessory 5: Gasket seal for vapour tube (Viton)
- Accessory 6: Gasket Seal for specific Chemicals
- Accessory 7: Feed tube for condenser without Teflon pipe
- Accessory 8: Receiving flask with S-35 cup socket joint capacity 1000ml
- Accessory 9: Evaporating flask Kjeldhal capacity 800 ml. B-24
- Accessory 10: Evaporating flask Kjeldhal capacity 500 ml. B-24
- Accessory 11: Evaporating flask Kjeldhal capacity 300 ml. B-24
- Accessory 12: Evaporating flask Kjeldhal capacity 100 ml. B-24
- Accessory 13: Tension spring to hold condensor
- Accessory 14: Wire Clip
- Accessory 15: Ball Joint Clip S-35 with screw lock
- Accessory 16: Waterbath double walled inner SS With thermostatic temperature control
- Accessory 17: Spare heater for water bath
- Accessory 18: Glass safety trap
Catalog No. |
Particulars |
SLEP2984 |
Rotary Vacuum Evaporator, Cold Trap Condenser, Thermostatic Temperature Control |
SLEP2985 |
Accessory 1 |
SLEP2986 |
Accessory 2 |
SLEP2987 |
Accessory 3 |
SLEP2988 |
Accessory 4 |
SLEP2989 |
Accessory 5 |
SLEP2990 |
Accessory 6 |
SSLEP2991 |
Accessory 7 |
SLEP2992 |
Accessory 8 |
SLEP2993 |
Accessory 9 |
SLEP2994 |
Accessory 10 |
SLEP2995 |
Accessory 11 |
SLEP2996 |
Accessory 12 |
SLEP2997 |
Accessory 13 |
SLEP2998 |
Accessory 14 |
SLEP2999 |
Accessory 15 |
SLEP3000 |
Accessory 16 |
SLEP3001 |
Accessory 17 |
SLEP3002 |
Accessory 18 |
Rotary Vacuum Evaporator, Cold Trap Condenser, Digital Temperature Control
This model of evaporator is supplied complete with geared drive non sparkling noiseless motor offering smooth speed control by analog knob upto 200 R.P.M. jack arrangement is fitted on tapered front base for positioning glass assembly. Double walled water bath with digital temperature controller, glass condenser double walled with one opening for vacuum & top reservoir for cooling medium, pear (kjeldhal) shaped evaporating flask capacity 800 ml, receiver flask capacity one litre fitted with a ball joint, feeding rube, vapour path tube provided with a pressure tube, seal, spring and clips a complete working unit. (Patented Product)
Accessory at extra cost:
- Accessory 1: Suitable oil free vacuum pump for rotary evaporator with vacuum gauge & regulator
- Accessory 2: Cold Trap condenser double coiled with two outlets for water circulation. With S-3 5 Ball at bottom for connecting to receiving flask, quickfit type joint at top for vacuum, cock for feeding tube on one side while the other side will be connected to motor with ring.
- Accessory 3: Cone Adapter for condenser to Vacuum pump
- Accessory 4: Vapour path tube B-24 B-29
- Accessory 5: Gasket seal for vapour tube (Viton)
- Accessory 6: Gasket Seal for specific Chemicals
- Accessory 7: Feed tube for condenser without Teflon pipe
- Accessory 8: Receiving flask with S-35 cup socket joint capacity 1000ml
- Accessory 9: Evaporating flask Kjeldhal capacity 800 ml. B-24
- Accessory 10: Evaporating flask Kjeldhal capacity 500 ml. B-24
- Accessory 11: Evaporating flask Kjeldhal capacity 300 ml. B-24
- Accessory 12: Evaporating flask Kjeldhal capacity 100 ml. B-24
- Accessory 13: Tension spring to hold condensor
- Accessory 14: Wire Clip
- Accessory 15: Ball Joint Clip S-35 with screw lock
- Accessory 16: Waterbath double walled inner SS With thermostatic temperature control
- Accessory 17: Spare heater for water bath
- Accessory 18: Glass safety trap
Catalog No. |
Particulars |
SLEP3012 |
Rotary Vacuum Evaporator, Cold Trap Condenser, Digital Temperature Control |
SLEP3013 |
Accessory 1 |
SLEP3014 |
Accessory 2 |
SLEP3015 |
Accessory 3 |
SLEP3016 |
Accessory 4 |
SLEP3017 |
Accessory 5 |
SLEP3018 |
Accessory 6 |
SLEP3019 |
Accessory 7 |
SLEP3020 |
Accessory 8 |
SLEP3021 |
Accessory 9 |
SLEP3022 |
Accessory 10 |
SLEP3023 |
Accessory 11 |
SLEP3024 |
Accessory 12 |
SLEP3025 |
Accessory 13 |
SLEP3026 |
Accessory 14 |
SLEP3027 |
Accessory 15 |
SLEP3028 |
Accessory 16 |
SLEP3029 |
Accessory 17 |
SLEP3030 |
Accessory 18 |
Rotary Vacuum Evaporator, Rotary Vacuuma 5000
Rotary Vacuuma 5000 single phase non-sparking geared drive unit 220 volts support stand fitted with heavy duty jack arrangement on stainless steel rod for positioning glass assembly. A variable speed regulator thermostatic controlled stainless steel water bath, double coiled vertical glass condenser with opening for vacuum & cooling, trap to support & connect condenser with motor unit & receiving flask, round bottom evaporating flask capacity 5000ml. provided with flange to connect with motor, unit glass vapour bath tube, round bottom receiving pipe extendion & special sealing arrangements to evacuate, a complete unit. (Patented Product)
Catalog No. |
Particulars |
SLEP3040 |
Rotary Vacuum Evaporator, Rotary Vacuuma 5000 |
Rotary Vacuum Evaporator, Chiller Refrigerated Circulater
It has built in circulating pump and water tank of rust proof stainless steel. The built in pump has a flow rate of 2.5 meters and internal tank capacityacity 10 liters. The temperature is controlled by a digital temperature, indicator cum controller. Construction: The body of the chiller is mounted on a sturdy angle frame with inner chamber consisting of thick polished stainless steel reservoir with cooling coil duly soldered on the outside of the same to ensure perfect cooling from +0 degree celsius to below ambient. The hollow space between the inner chamber and outer wall is filled with high grade insulation to prevent loss of temperature the refrigeration system consisting of hermetically sealed compressor for minimum noise lever and smooth operation.
Catalog No. |
Particulars |
SLEP3050 |
Rotary Vacuum Evaporator, Chiller Refrigerated Circulater |