The Super Deluxe Series Autoclaves are sturdily constructed in rustproof, heavy gauge aluminum for use in rugged condition. Its a unique vessel that generates steam under pressure and temperature between 120°C to 135°C. On reaching the right temperature the instruments are subject to a saturated steam environment for a pre-specified time which results in safe and guaranteed sterilization. Available in various models and sizes from 6 liters capacity to 63 liters capacity to suit different application. These can be used on electricity as well as on any external heat source such as kerosene stove, gas burner, wood & charcoal.

Features and Benefits:

• All aluminium deep drawn seamless construction.
• Light, compact, portable, easy to use top loading autoclaves.
• Fast 20 min. sterilizing cycle at 121& c.
• Equipped with two stages over pressure protection system incorporating a calibrated continuous bleeding pressure stopcock and pressure release weight valve.
• Extended life gasket & heating element (ISI marked).
• Equipped with heat resistant handles and steam release / control valve.
• For assurance of quality each autoclave is tested to the parameter of successful sterilization.
• Optional TST indicator stickers provide independent verification that the correct combination of temperature, steam & time has been achieved for successful sterilization.
• Pressure Gauge : Colour coded pressure gauge showing internal chamber conditions during the cycle.
• Sterilization zone in green colour is shown from 15 psi to 20 psi (OR 1.034 bar to 1.378 bar) which is equivalent to temperature of 121°c to 127°c. Dial size : 2.5". Dial show measurement in 2 units (i) kg/cm2 (ii) lb/inch2
• Full scale dial of pressure gauge is 0-30 lb/ inch2 or 0-2 kg/ cm2. Caution zone in red colour.
• Inclusive of - inner & outer stand.
• Optional (to be ordered separately) - Inside container / baskets / dressing drums, timer and spares

Steam sterilizer, pressure type, single rack, used to sterilize reusable: syringes and needles. Aluminium vessel with high pressure seal suitable for carrying out sterilisation using superheated steam. Steam sterilizer designed to operate on external heat source (non-electric) at +121°C over a 20 minute period.

Components: Aluminium vessel with heat resistant handles. Aluminium cover with heat resistant handles , rubber sealing gasket, pressure valve & safety plug. 1 aluminium rack with 1 lid, for 36 syringes ( 4 syringes 5ml, 16 syringes 2 ml, 16 syringes 1 ml) and 40 needles. Sterilization capacity: 5.5 litres.

Supplied with: 1 x sterilization indicator sticker (pack of 100), 2 x spare safety plugs, 3 x spare sealing gaskets, 1 x plastic bowl for washing syringes, 1 x carrying bag, 1 x user manual in English.

Steam sterilizer, pressure type, double rack, used to sterilize reusable: syringes and needles. Aluminium vessel with high pressure seal suitable for carrying out sterilization using superheated steam. Steam sterilizer designed to operate on external heat source (non-electric) at +121°C over a 20 minute period.

Components: Aluminium vessel with handles. Aluminium cover with handles and rubber sealing gasket. Pressure valve. Safety plug. 2 aluminium racks with 2 lid, for 64 syringes (44 syringes 2 ml, 16 syringes 1 ml, 4 syringes 5 ml) and 80 needles per rack. Sterilization capacity: 9 litres.

Supplied with: 1 x sterilization indicator sticker (pack of 100), 2 x spare safety plugs, 3 x spare sealing gaskets, 1 x plastic bowl for washing syringes, 1 x carrying bag, 1 x user manual in English.

 

Construction: These autoclaves are made of 10 gauge aluminum. The drum is deep drawn & the ring on top is riveted. The lid is made by casting. Locking of lid by 6 nuts with rubber gasket seal in between (not metal to metal seal). Two safety valves, pressure gauge, flexible metal rubbing to exhaust air. Includes outer stand, inner aluminum container, inner tripod stand.

Construction: Superior quality & finish. All these autoclaves are made of 8 gauge aluminum. The drum is deep drawn. The lid is die casted. Locking of lid by 6 nuts with rubber gasket seal in between (no metal to metal seal). Two safety valves, pressure gauge, flexible metal tubing to exhaust air. Includes outer stand, inner tripod stand.

Features:

• Equipped with two stages "over pressure" protection system incorporating a calibrated continuous bleeding Pressure stopcock and pressure release weight valve.
• Pressure Gauge : Colour coded pressure gauge showing internal chamber conditions during the cycle. Sterilization zone in green colour is shown from 15 psi to 20 psi (or 1.034 bar to 1.378 bar) which is equivalent to temperature of 121°c to 127°c. Dial size : 2.5". Dial show measurement in 2 units (i) kg/cm2 (ii) lb/inch2 Full scale dial of pressure gauge is 0-30 lb/ inch2 or 0-2 kg/cm2 Caution zone in red colour.
• Equipped with steam release /control valve and flexible metal exhaust tube.
• For assurance of quality each autoclave is tested to the parameter of successful sterilization.
• Optional "TST" indicator stickers provide independent verification that the correct combination of temperature, steam & time has been achieved for successful sterilization.
• All aluminum deep drawn seamless construction of base unit.
• Heavy cast aluminum lid with six wing nut.
• Easy to use top loading autoclaves.
• Fast 20 min. sterilizing cycle at 121° C.

Construction:These portable vertical autoclaves are made out of thick high quality (14 gauge) stainless steel sheet, deep drawn to cylindrical shape, having no joints and welding. Seamless construction allows no bacteria residue and free from dirt accumulation. Fitted with pressure gauge, safety valve (weight type), seam/pressure release cock, lid handle. Lid is similar to pressure cooker with locking over rubber gasket.

Features:

• Stainless steel seamless construction.
• Portable vertical pressure type, easy to use top loading autoclaves.
• The steam pressure inside with autoclave can develop from 1.10 kgf / sq.cm (15 psi) to 1.25 kgf / sq.cm (18 psi).
• Equipped with top handle pressure gauge and pressure release valve.

• Stainless Steel 304 seamless construction.
• Auto cut-off heating element and indication light.
• With time adjustment facility.
• Dimension : 235mm Dia x 235mm Ht. (with Lid).

Note: Height and capacity adjustable as per customers requirement.

• Stainless Steel 304 seamless construction.
• Dimension : 235mm Dia x 240mm Ht. (with Lid).

Note: Height and capacity adjustable as per customers requirement.

• Stainless Steel 304 seamless construction.
• Dimension : 220mm Dia x 300mm.Ht. (with Lid).

Note: Height and capacity adjustable as per customers requirement.

• Stainless Steel 304 seamless construction.
• Dimension : 220mm Dia x 300mm Ht.

Note: Height and capacity adjustable as per customers requirement.

• These sterilizing Trays & baskets made in Stainless Steel 304, allow a systematic organization of instrument for sterilization. The comfortable handling provides safety and control through all fields of applications in sterilization. Storage and transportation are also perfectly organized with these baskets and trays.
• Available in various shapes, sizes & designs to accommodate wide range of Surgical Instruments & Equipment.

 

• Size : 705x204x150mm

• This tray system is a nice sterilizing / disinfecting / soaking tray that is essential for sterilization of certain instruments & equipment which cannot be sterilized under steam & pressure in Autoclaves. These can be also used as a back up to your other sterilizing system.
• The tray includes Outer Tray with lid & a Lift-out drain basket with handles to facilitate lifting of instruments in and out of the soaking solution. Lid protects against spillage and minimizes vaporization.>
• Dimension: Outer tray measures 845mm L x 225mmWx 150mm H
• Volume Capacity: 10 liters appx, [NON AUTOCLAVABLE]