Others


Educational Equipments Manufacturer, Exporters & Suppliers - School Educational Equipments Manufacturers & Exporters of Educational Equipments for Lab. Science Lab Products, Teaching Aids, Classroom Instruments, Educational Laboratory

Electronics Tool Kit

Code: ETMOT0001

Electronics Tool Kit is the elegant combination of basic electronic tools required for electronics lab in Schools, Colleges, Universities, Research & Development and Industries. Electronics Tool Kit is housed in metal box for long life and includes the necessary 12 items in the same.

Features:

  • Screw Driver Set 1
  • Fine Screw Driver 1
  • Wire Cutter/Stripper 1
  • Line Tester 1
  • Analogue Multimeter 1
  • Crimping Tool 1
  • Nose Pliers 1
  • Flat Pliers 1
  • Soldering Iron 1
  • Flux 1
  • SolderWire 1
  • Brush 1
  • Box 1

Digital Colour pattern Generator

Code: ETMOT0004

Electronics Tool Kit is the elegant combination of basic electronic tools required for electronics lab in Schools, Colleges, Universities, Research & Development and Industries. Electronics Tool Kit is housed in metal box for long life and includes the necessary 12 items in the same.

Features:

  • System : PAL
  • Type of Patterns : Vertical Bras, Horizontal Bras, Dots, Circle White, Multi Colour
  • Colour Pattern : White, Red, Green, Blue, Black, Yellow, Magenta, Cyan

Sound Signal

  • Frequency : 5.5 Mhz Video Carrier Frequency modulated by 1KHz internally 50 Khz sweep
  • Colour Signal : 4.43 Crystal controlled

Sync Pulses:

  • Line Frequency : 15625Hz (Fixed)
  • Frame Frequency : 50Hz (Fixed)
  • Stability : 1%
  • Output Impedance : 300ohms Balanced
  • Sound : Frequency modulation 1KHz approx

Logic Probe 50MHz TTL/CMOS & Pulser

Code: ETMOT0007

Specifications:

  • Sync input impedance.........................1MW
  • Pulse Rate.................................. 0.5 / 400Hz
  • Pulse Width................................. 10mS
  • Output current..............................100mA sink / Source
  • Square Wave Output Current ............... 5mA sink / source
  • Power Supply Range..............................5 - 15V DC
  • Power Supply Protection............... 20V DC (30 seconds max.)
  • Sync Input Protection................ 120V DC (30 seconds max.)
  • Test Point Protection................. 35V DC (30 seconds max.)

Electrical (At 23±50C, 75% relative humidity maximum):

  • Maximum Input Signal Frequency.........................50MHz
  • Input Impedance.................................................120K
  • Operating supply range...................................... 4V DC Minimum, 18V DC Maximum
  • TTL Logic "1" (Hi LED)... ............................ ...... 3.0±0.25VW
  • Logic "0" (Lo LED)................................ ...... 0.75±0.25V
  • CMOS : Logic "1" (Hi LED)............................ .... 60%Vcc±5%
  • Logic "0" (Lo LED)........................... ... 15%Vcc±5%
  • Minimum Detectable Pulse width........................ 10 Nanoseconds
  • Maximum Signal Input Protection.......................±70V AC/DC (for 15 seconds)
  • Power supply protection................................... ±20V DC
  • Pulse indicator Flash Time..................................

Semiconductors Component Checker And Curve Tracer

Code: ETMOT0010

Semiconductor component checker & curve tracer are useful for checking & tracing the characteristics curve of a variety of components in a very short time duration. The Instrument consist of five different sections, detail Specifications & features are following :

SECTION - 1. DIODE CHECKER :-
Specifications :


  • Indicates whether diode is open circuit, short circuit & if working, its polarity.
  • Silicon & germanium, both types of diodes can be tested.

Features:

Two LED's & One test switch are provided showing :
  • Open diode - If both LED's are OFF.
  • Short diode - If both LED's are ON.
  • Good diode - If one glows fully & other dim.

SECTION - 2. TRANSISTOR CHECKER :-
Specifications :


  • For good transistor LED marked GOOD will glow.
  • For bad transistor LED marked BAD will glow..

Features:

  • One transistor socket and three sockets are provided.
  • A switch decides NPN or PNP transistor.
  • Good transistor - If one glows fully & other dim.

SECTION - 3. FET CHECKER :-
Specifications :


  • For GOOD FET, the meter needle vibrates continuously between a maximum position to a minimum position.
  • For BAD FET, either there is no response in the meter or it holds at one point.

Features:

  • One transistor socket and three sockets are provided.
  • An ammeter of 1 mA range is provided .
  • Designed to test almost all FET's.

SECTION - 4. TRANSISTOR PARAMETER CHECKER :-
Specifications :


Transistor tester tests i leakage and gain cbo' at two ranges lowand high.
  • Icbo TEST : 0 to 15 mA on LOW range. 0 to 50mA on HIGH range.
  • LEAKAGE TEST : 0 to 500 mA on LOW range. 0 to 1500mA on HIGH range.
  • GAIN TEST : 0 to 50 mA on LOW range. 0 to 150mA on HIGH range for values of base current i.e. 300, 150, 50, and 25mA.

Features:

  • Big 115 mm X 55 mm ( 4.5" X 2.25") dial of meter increases the accuracy of readings.
  • Four values of base current are provided for gain measurement so that gain can be compared under four conditions.
  • A six position selector switch selects gain at 300, 150, 50, and 25mA base current, leakage and I currents. CBO
  • Another switch selects HIGH and LOW rangs.
  • A transistor socket is provided for transistors with short leads, and three sockets for any other.
  • A PNP - NPN switch selects PNP or NPN transistor to be checked.

SECTION - 5. CURVE TRACER :-
Specifications :


Semiconductor Device range:
  • Bipolar Transistor (NPN & PNP)
  • FET (Juction N & PType)
  • SCR
  • UJT (N-Channel)
  • ZENER DIODE (Upto 50VVz)
  • GERMANIUM & SILICON DIODES
  • LED

Features:

  • Full protection of semi- conductor devices.
  • Full protection of internal circuitry.
  • Selection of Forward or Reverse characteristics for Zener diodes, diodes & LED by a switch.
  • Ease of operation due to minimum number of panel settings.

Common Features:

  • For connecting devices two Nos. of 3 test cables are provided.
  • Power Requirement : 230 V ± 10% at 50 Hz A.C. mains.
  • Strongly supported by detailed operating instractions.
  • Weight : 4 Kg. (Approx)
  • Dimension : W 340 x H 110 x D 210 .

Other Apparatus Required:

  • Cathod Ray Oscilloscape

Low Tension AC/DC Variable Power Supply

Code: ETMOT0013

Low Tension AC / DC Variable Power Supply. Output Voltage can be easily varied with the help of a Variac. Power Supply can be used for variety of applications like in Education, Engineering, Telecommunication, Industrial Electronics, Nuclear Sciences, Analogue and Digital Computers, Logic Circuits, DC Amplifiers Calibration of electrical meters and Instruments, Defense, Institutes, Experimental Laboratories, Testing, Production etc.

Parameter

Input Voltage: 240V AC @ 50Hz 240V AC @ 50Hz 240V AC @ 50Hz 240V AC @ 50Hz
Output Voltage:
AC: 0-25V @ 8Amp 0-25V @ 8Amp. 0-25V @ 5Amp. 0-250V @ 5Amp.
DC: 0-25V @ 8Amp. 0-25V @ 8Amp. 0-25V @ 5Amp. 0-250V @ 5Amp.
Voltage Meter: X v v X
Current Meter: X X v X
AC/ DC Voltage Selector Switch: X v v X
MCB: X v v X
Power Supply: AC/ DC AC/ DC AC/ DC AC/ DC
Metal Case with Grounding: v v v v
Manual: v v v v
Weight: 16 Kg. 18 Kg. 11 Kg. 23 Kg.
Dimension: W 290 x H 160 x D 230

Low Tension AC/DC Variable Power Supply

Code: ETMOT0016

Low Tension AC / DC Variable Power Supply. Output Voltage can be easily varied with the help of a Variac. Power Supply can be used for variety of applications like in Education, Engineering, Telecommunication, Industrial Electronics, Nuclear Sciences, Analogue and Digital Computers, Logic Circuits, DC Amplifiers Calibration of electrical meters and Instruments, Defense, Institutes, Experimental Laboratories, Testing, Production etc.

Parameter

Input Voltage: 240V AC @ 50Hz 240V AC @ 50Hz 240V AC @ 50Hz 240V AC @ 50Hz
Output Voltage:
AC: 0-25V @ 8Amp 0-25V @ 8Amp. 0-25V @ 5Amp. 0-250V @ 5Amp.
DC: 0-25V @ 8Amp. 0-25V @ 8Amp. 0-25V @ 5Amp. 0-250V @ 5Amp.
Voltage Meter: X v v X
Current Meter: X X v X
AC/ DC Voltage Selector Switch: X v v X
MCB: X v v X
Power Supply: AC/ DC AC/ DC AC/ DC AC/ DC
Metal Case with Grounding: v v v v
Manual: v v v v
Weight: 16 Kg. 18 Kg. 11 Kg. 23 Kg.
Dimension: W 290 x H 160 x D 230

Low Tension AC/DC Variable Power Supply

Code: ETMOT0019

Low Tension AC / DC Variable Power Supply. Output Voltage can be easily varied with the help of a Variac. Power Supply can be used for variety of applications like in Education, Engineering, Telecommunication, Industrial Electronics, Nuclear Sciences, Analogue and Digital Computers, Logic Circuits, DC Amplifiers Calibration of electrical meters and Instruments, Defense, Institutes, Experimental Laboratories, Testing, Production etc.

Parameter

Input Voltage: 240V AC @ 50Hz 240V AC @ 50Hz 240V AC @ 50Hz 240V AC @ 50Hz
Output Voltage:
AC: 0-25V @ 8Amp 0-25V @ 8Amp. 0-25V @ 5Amp. 0-250V @ 5Amp.
DC: 0-25V @ 8Amp. 0-25V @ 8Amp. 0-25V @ 5Amp. 0-250V @ 5Amp.
Voltage Meter: X v v X
Current Meter: X X v X
AC/ DC Voltage Selector Switch: X v v X
MCB: X v v X
Power Supply: AC/ DC AC/ DC AC/ DC AC/ DC
Metal Case with Grounding: v v v v
Manual: v v v v
Weight: 16 Kg. 18 Kg. 11 Kg. 23 Kg.
Dimension: W 290 x H 160 x D 230

Low Tension AC/DC Variable Power Supply

Code: ETMOT0022

Low Tension AC / DC Variable Power Supply. Output Voltage can be easily varied with the help of a Variac. Power Supply can be used for variety of applications like in Education, Engineering, Telecommunication, Industrial Electronics, Nuclear Sciences, Analogue and Digital Computers, Logic Circuits, DC Amplifiers Calibration of electrical meters and Instruments, Defense, Institutes, Experimental Laboratories, Testing, Production etc.

Parameter

Input Voltage: 240V AC @ 50Hz 240V AC @ 50Hz 240V AC @ 50Hz 240V AC @ 50Hz
Output Voltage:
AC: 0-25V @ 8Amp 0-25V @ 8Amp. 0-25V @ 5Amp. 0-250V @ 5Amp.
DC: 0-25V @ 8Amp. 0-25V @ 8Amp. 0-25V @ 5Amp. 0-250V @ 5Amp.
Voltage Meter: X v v X
Current Meter: X X v X
AC/ DC Voltage Selector Switch: X v v X
MCB: X v v X
Power Supply: AC/ DC AC/ DC AC/ DC AC/ DC
Metal Case with Grounding: v v v v
Manual: v v v v
Weight: 16 Kg. 18 Kg. 11 Kg. 23 Kg.
Dimension: W 290 x H 160 x D 230

Electronic Coulomb Meter

Code: ETMOT0025

Electronic Coulomb meter is suitable for charge measurement in the range of 10nC to 10mC. It uses a large 4½" x 2¼" rectangular meter for easy reading. For good many experiments it replaces conventional Ballistic Galvanometer. While using Ballistic Galvanometer, much of the time, care and thought of the students goes to it, so that the actual measurement becomes secondary.

To overcome this, an electronic device was developed which is mechanically steady and gives a steady deflection in an output meter proportional to the charge fed into it. The electronic device is essentially, an amplifier and an integrator followed by a buffer. The integrated charge get stored in a capacitor and the voltage across the capacitor is measured using a voltmeter through a unit gain amplifier (buffer).

Features:

  • Easy to use
  • High sensitivity
  • Steady deflection in an output meter proportional to the charge fed into it.
  • Solid state design consisting of an amplifier, an integrator and a buffer.
  • Large scale meter.
  • Time saving.
  • Two terminals are provided for capacitor.
  • Discharge switch provided
  • Charge switch provided
  • Meter reset switch provided
  • Weight :4 Kg. (Approx)
  • Dimension : W 340 x H 110 x D 210

Specifications:

  • Range : 0-1uC,0-10 uC (Switch Selectable)
  • Resolution : 10-8 C/div at 0-1 uC range
  • Accuracy : ± 5%
  • Input Supply : 230V ± 10% AC at 50Hz

Low Tension AC/DC Variable Power Supply

Code: ETMOT0028

Low Tension AC / DC Variable Power Supply. Output Voltage can be easily varied with the help of a Variac. Power Supply can be used for variety of applications like in Education, Engineering, Telecommunication, Industrial Electronics, Nuclear Sciences, Analogue and Digital Computers, Logic Circuits, DC Amplifiers Calibration of electrical meters and Instruments, Defense, Institutes, Experimental Laboratories, Testing, Production etc.

Parameter: ETMOT0013---ETMOT0016---ETMOT0019---ETMOT0022--- ---ETMOT0028---ETMOT0031
Input Voltage: 240VAC @ 50Hz---240VAC @ 50Hz---240VAC @ 50Hz---240VAC @ 50Hz---240VAC @ 50Hz---240VAC @ 50Hz---240VAC @ 50Hz
Output Voltage:
AC: 0-25V @ 8Amp.---0-25V @ 8Amp.---0-25V @ 5Amp---0-250V @ 5Amp---0-250V @ 4Amp.---0-30V @ 10Amp---0-30V @ 6Amp
Output Voltage:
DC: 0-25V @ 8Amp.---0-25V @ 8Amp.---0-25V @ 5Amp---0-250V @ 5Amp---0-250V @ 4Amp.---0-30V @ 10Amp---0-30V @ 6Amp
Voltage Meter: x---v---v---x---x---v---v
Current Meter: x---x---v--- ---x---v---v
AC/ DC Voltage: x---v---v---x---x---v---v
Selector Switch:
MCB: x---v---v---x---v---v---v
Power Supply: AC/ DC---AC/ DC---AC/ DC---AC/ DC---AC/ DC---AC/ DC---AC/ DC
Metal Case with Grounding: v---v---v---v---v---v---v
Manual: v---v---v---v---v---v---v
Weight: 16 Kg.---18 Kg.---11 Kg.---23 Kg---25 Kg.---20 Kg.---18 Kg
Dimension: W 290 x H 160 x D 230---W 290 x H 160 x D 230---W 290 x H 160 x D 230---W 290 x H 160 x D 230---W 290 x H 160 x D 230---W 290 x H 160 x D 230---W 290 x H 160 x D 230

Low Tension AC/DC Variable Power Supply

Code: ETMOT0031

Low Tension AC / DC Variable Power Supply. Output Voltage can be easily varied with the help of a Variac. Power Supply can be used for variety of applications like in Education, Engineering, Telecommunication, Industrial Electronics, Nuclear Sciences, Analogue and Digital Computers, Logic Circuits, DC Amplifiers Calibration of electrical meters and Instruments, Defense, Institutes, Experimental Laboratories, Testing, Production etc.

Parameter: ETMOT0013---ETMOT0016---ETMOT0019---ETMOT0022--- ---ETMOT0028---ETMOT0031
Input Voltage: 240VAC @ 50Hz---240VAC @ 50Hz---240VAC @ 50Hz---240VAC @ 50Hz---240VAC @ 50Hz---240VAC @ 50Hz---240VAC @ 50Hz
Output Voltage:
AC: 0-25V @ 8Amp.---0-25V @ 8Amp.---0-25V @ 5Amp---0-250V @ 5Amp---0-250V @ 4Amp.---0-30V @ 10Amp---0-30V @ 6Amp
Output Voltage:
DC: 0-25V @ 8Amp.---0-25V @ 8Amp.---0-25V @ 5Amp---0-250V @ 5Amp---0-250V @ 4Amp.---0-30V @ 10Amp---0-30V @ 6Amp
Voltage Meter: x---v---v---x---x---v---v
Current Meter: x---x---v--- ---x---v---v
AC/ DC Voltage: x---v---v---x---x---v---v
Selector Switch:
MCB: x---v---v---x---v---v---v
Power Supply: AC/ DC---AC/ DC---AC/ DC---AC/ DC---AC/ DC---AC/ DC---AC/ DC
Metal Case with Grounding: v---v---v---v---v---v---v
Manual: v---v---v---v---v---v---v
Weight: 16 Kg.---18 Kg.---11 Kg.---23 Kg---25 Kg.---20 Kg.---18 Kg
Dimension: W 290 x H 160 x D 230---W 290 x H 160 x D 230---W 290 x H 160 x D 230---W 290 x H 160 x D 230---W 290 x H 160 x D 230---W 290 x H 160 x D 230---W 290 x H 160 x D 230

3D Printer - Rapid Prototyping Machine

Code: ETMOT0034

This Rapid Prototyping Machines is very economic, low cost machine, low cost printing material and it is very easy to operate it helps the designer to check his artwork with low cost and short time. This is the amazing Rapid Prototyping Technology. It can make your self-produce dream come true.

Rapid Prototyping Machine can be widely used in:

  • Education
  • Art / Architecture
  • Consumer Electronics Products
  • Medical
  • Machining
  • Precision Manufacturing
  • Aviation
  • DIY
  • Auto
  • Household Appliances
  • Craft and Toys Manufacturing

Parameter

  • RP Process: FDM (Fused Deposition Modeling)
  • Machine Size: 510mm×460mm×410mm
  • Packing Dimension: 585mm×525mm×480mm
  • Model Size: 225mm×145mm×150mm
  • Modeling Precision: ±0.2mm/100mm
  • Layer Thickness: 0.15mm~0.4mm
  • Modeling Speed: 10~120mm/s, recommend 80mm/s
  • Nozzle Dia: 0.4mm
  • Velocity: ±24cc/h
  • Filament Size: 1.75mm
  • Working Temp: Extruder180-260°C, Bed: 60-110°C
  • Material: ABS/PLA (White/Red/Yellow/Green/Black/Blue etc.)
  • Workstation Compatibility Windows: emoji: 7/Windows:emoji:XP/Windows:emoji:Vista/Linux
  • Interface: USB
  • Power Consumption: 250W, 100-120/200-240VAC, 50/60Hz
  • Operation Environment Temperature: 100C-32.50C
  • Humidity: 20%-80% (RH)
  • Language: Chinese/English
  • File Format: STL
  • Weight: 11kg (Net Weight) /13kg (Package Weight)
  • Accessory: Tools, Filament, SD card
Educational Equipments
Biology Lab Microscopes Physics Lab Chemistry Lab
Lab Glassware Chinaware & Porcelain ware Lab Platinum-ware Lab Plasticware Stands, Racks, Clamps Wooden Racks and Stands Electro-Chemistry Power Supplies Electrical Spares & Supplies Molecular Models Organic Chemistry Set Laboratory Balances
/ Lab Measuring Instruments
Measurement Aids Spatula Lab Rubber Tubing Chemistry Lab Consumables Lab Brushes Hand Tools and Others Gas Tap & Fittings Lab Testing Papers Chemistry Lab Models Chemistry Charts Lab Safety Supplies Thermometers Laboratory Chemicals
Lab Microscopes & Slides Laboratory Glassware Lab Plasticware Mathematics Lab School/College Science Kits Geography & Geology Teaching Equipments Educational Charts Whiteboard & Boards
Lab Measuring Instruments Electronics Lab Engineering Lab Testing Lab (Engineering) Astronomy Lab Equipments Civil Engineering Equipments Civil Engineering Models Scientific Lab Instruments Blood Bank Equipments Educational Charts